Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

not boosting right...

Thread Tools
 
Search this Thread
 
Old Feb 18, 2007 | 08:29 PM
  #16  
EVOIXMR8916's Avatar
Thread Starter
Evolved Member
iTrader: (8)
 
Joined: Feb 2006
Posts: 767
Likes: 0
From: Chicago, IL
nope both are tight and snug...
Reply
Old Feb 18, 2007 | 08:40 PM
  #17  
scottatyamaha's Avatar
Evolved Member
iTrader: (21)
 
Joined: Jan 2004
Posts: 2,210
Likes: 0
From: South Carolina
well ya got me....I am stumped then.
Reply
Old Feb 18, 2007 | 08:44 PM
  #18  
EVOIXMR8916's Avatar
Thread Starter
Evolved Member
iTrader: (8)
 
Joined: Feb 2006
Posts: 767
Likes: 0
From: Chicago, IL
dealer should fix it right....
Reply
Old Feb 18, 2007 | 08:53 PM
  #19  
EVOIXMR8916's Avatar
Thread Starter
Evolved Member
iTrader: (8)
 
Joined: Feb 2006
Posts: 767
Likes: 0
From: Chicago, IL
bump...anyone else....
Reply
Old Feb 18, 2007 | 09:00 PM
  #20  
evo150's Avatar
Evolved Member
iTrader: (51)
 
Joined: Sep 2005
Posts: 1,981
Likes: 0
From: cincinnati
have you checked your licp, and the uicp at the throttle body?

Last edited by evo150; Feb 18, 2007 at 09:02 PM.
Reply
Old Feb 18, 2007 | 09:05 PM
  #21  
EVOIXMR8916's Avatar
Thread Starter
Evolved Member
iTrader: (8)
 
Joined: Feb 2006
Posts: 767
Likes: 0
From: Chicago, IL
ok goin now..lol
Reply
Old Feb 18, 2007 | 09:12 PM
  #22  
evrblazin's Avatar
Evolved Member
 
Joined: Aug 2006
Posts: 896
Likes: 1
From: Pennsylvania
just take it to the dealer while u are still stock ,which will be like another week
Reply
Old Feb 18, 2007 | 09:14 PM
  #23  
EVOIXMR8916's Avatar
Thread Starter
Evolved Member
iTrader: (8)
 
Joined: Feb 2006
Posts: 767
Likes: 0
From: Chicago, IL
shhhh.....lol i know damn exhaust is on back order.....lol
Reply
Old Feb 18, 2007 | 09:16 PM
  #24  
fraser91084's Avatar
Evolving Member
iTrader: (1)
 
Joined: Jan 2006
Posts: 141
Likes: 0
From: denton texas
be sure to check the connections around the bov. mine was alittle bit loose and it made my car drive like crap
Reply
Old Feb 18, 2007 | 09:17 PM
  #25  
EVOIXMR8916's Avatar
Thread Starter
Evolved Member
iTrader: (8)
 
Joined: Feb 2006
Posts: 767
Likes: 0
From: Chicago, IL
i felt it on bolt i cant get to and the othe rone was loose...
Reply
Old Feb 18, 2007 | 09:26 PM
  #26  
bandwagon's Avatar
Evolving Member
iTrader: (5)
 
Joined: Mar 2006
Posts: 105
Likes: 0
From: ca
the dealer will give you **** try to void your warranty and figure some other way to screw you over but if all your hoses are on bov and ic pipes and sleeves are on then one can never tell. good luck
Reply
Old Feb 18, 2007 | 09:28 PM
  #27  
EVOIXMR8916's Avatar
Thread Starter
Evolved Member
iTrader: (8)
 
Joined: Feb 2006
Posts: 767
Likes: 0
From: Chicago, IL
nope not the fix....licp is ok
Reply
Old Feb 19, 2007 | 09:20 AM
  #28  
EVOIXMR8916's Avatar
Thread Starter
Evolved Member
iTrader: (8)
 
Joined: Feb 2006
Posts: 767
Likes: 0
From: Chicago, IL
bump
Reply
Old Feb 19, 2007 | 11:56 AM
  #29  
Danny23's Avatar
Evolved Member
iTrader: (7)
 
Joined: Dec 2005
Posts: 1,814
Likes: 0
From: orange county NY
Only way your going to find your leak is to do a boost leak test. Bring it in.
Reply
Old Feb 19, 2007 | 12:58 PM
  #30  
Jersey Dino's Avatar
Evolved Member
iTrader: (4)
 
Joined: Apr 2006
Posts: 578
Likes: 3
From: North Jersey
if you are getting a really loud hissing noise it should be leaking on the intake side. the only time I have ever had a hissing noise was when the inlet pipe on th eturbo wasnt tightend down enough. it would whine like a supercharger and make no boost. sounds like it wants too but its just sucking in air and not boosting. when the intercooler hose pops off the throttle body, it just goes nowhere. and almost stalls. if you are a hands on guy, get under the car and take the plastic undertray off and inspect all your boost tubes.you can get a good look at just about everything from here. good luck
Reply



All times are GMT -7. The time now is 12:32 AM.