Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

4g63 evo IV to IX

Thread Tools
 
Search this Thread
 
Old Aug 28, 2007, 10:19 AM
  #16  
Evolving Member
Thread Starter
 
akira2_03's Avatar
 
Join Date: Apr 2007
Location: Edmonton/Canada
Posts: 179
Likes: 0
Received 0 Likes on 0 Posts
^ bump
Old Aug 29, 2007, 12:41 PM
  #17  
Evolving Member
Thread Starter
 
akira2_03's Avatar
 
Join Date: Apr 2007
Location: Edmonton/Canada
Posts: 179
Likes: 0
Received 0 Likes on 0 Posts
^^bump

anyone know if the bell housing from the tranny's fit the same??
Old Nov 9, 2007, 11:14 AM
  #18  
Evolving Member
iTrader: (3)
 
downshift411's Avatar
 
Join Date: Mar 2007
Location: MA
Posts: 201
Likes: 0
Received 0 Likes on 0 Posts
evo 4/5/6 uses a smaller tranny. the evo 7+ use a much bigger tranny that will not fit the evo4-6 model due to it hitting the frame.
Old Nov 9, 2007, 12:27 PM
  #19  
Evolved Member
 
crcain's Avatar
 
Join Date: Oct 2002
Posts: 2,788
Likes: 0
Received 1 Like on 1 Post
AFAIK as long as you are talking about a 5-spd box... they are all interchangeable between IV-IX. FWIW I've run an 8 gearbox and a 4 gearbox on my 6.

Also for the best pinout info go here:

http://www.lancerregister.com/showth...hreadid=142077
Old Nov 9, 2007, 12:29 PM
  #20  
Evolved Member
 
crcain's Avatar
 
Join Date: Oct 2002
Posts: 2,788
Likes: 0
Received 1 Like on 1 Post
IV - VIII engines are very similar. Only difference I can recall is the thermostat housing where the two radiator hoses connect to. Both my friends with Evo 6's run 8 engines with 6 gearboxes. And the thermostat housings are interchangeable... just means you might need different length / bend radiator hoses to reach.




All times are GMT -7. The time now is 02:26 AM.