I'm tryin to get my wastegate vacumn hoses back to stock. Guy that had the car before me messed it all up. I sorta have a clue how everything goes. I just installed a boost gauge and realized that my car was running like poop. 12PSI. Can anyone explain to me how the stock vacumn lines are suppose to look like on the wastegate and the turbo?? I keep reading about special vacumn lines.

 

 

Very helpful thanks, Do they have to be special vacumn lines from the Stealership?

 

^^That diagram will do the trick. Or you could look at the one that should be on your hood. Unless of course you have a carbon fiber hood.

 

The lines from the dealer have pills in them that you need.

 

I called them today and the parts "lady" didnt have a clue. Do they after market?

 

Mitsubishiparts.net for $15.00

http://www.mitsubishiparts.net/

 

Which vacumn line do i need? The line from the T-fitting to the solenoid?

 

Both coming from the wastegate solenoid.

 

After the T-fitting it doesnt matter?

 

It comes in all one piece.

 

Just order this and you have all you need.

http://www.mitsubishiparts.net/cart/?id=571&pn=1632A117

 

COool thanks

 

Ill use a pic from the WORKS site,this is the whole set you need minus the ECU.

 

Domo Arigato Doctor Roboto