Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

Boost Leak from Throttle Body?

Thread Tools
 
Search this Thread
 
Old Nov 12, 2007, 08:13 AM
  #1  
Evolving Member
Thread Starter
iTrader: (10)
 
w8lifter21's Avatar
 
Join Date: Aug 2007
Location: Lake County, IL
Posts: 210
Likes: 0
Received 1 Like on 1 Post
Boost Leak from Throttle Body?

Anyone experience this? I did a boost leak test because I spike to ~20-21ish psi then slide down to ~15psi. Test found that I have a leak where the throttle cable attaches to the throttle plate. If I push up/down/left/right on this part I can hear the air coming out change, sometimes stop for a 1/2 second or so.(Not actually open/close the throttle)

Anyone else experience a leak at this point?



I am pushing/moving this part^^
Old Nov 12, 2007, 08:20 AM
  #2  
Evolved Member
iTrader: (5)
 
PATRICK B.'s Avatar
 
Join Date: Aug 2007
Location: CALIFORNIA
Posts: 2,561
Likes: 0
Received 1 Like on 1 Post
Sounds like TB shaft seals don't it

Pretty typical w/ the stock TB's

Works has the fix.
Old Nov 12, 2007, 09:27 AM
  #3  
Evolved Member
iTrader: (82)
 
MasterNater's Avatar
 
Join Date: Aug 2006
Location: Tupelo, MS
Posts: 865
Received 22 Likes on 20 Posts
Oh yeah, it's typical. Very first thing I had to fix on my evo, just after bringing it home from the dealer.

The parts you need...
http://www.worksevo.com/store/produc...roducts_id=415

And the writeup...
https://www.evolutionm.net/forums/sh...d.php?t=220264
Old Nov 12, 2007, 10:06 AM
  #4  
Former Sponsor
iTrader: (161)
 
Aby@MIL.SPEC's Avatar
 
Join Date: Jun 2003
Location: San Elijo Hills, Ca.
Posts: 3,043
Received 12 Likes on 12 Posts
this is where i have seen 100% of all failed seals....

buy the works seals. that what i use for my 65mm tb's
Old Nov 13, 2007, 05:59 PM
  #5  
Evolving Member
iTrader: (8)
 
JKav's Avatar
 
Join Date: Mar 2006
Location: in a van down by the river
Posts: 239
Likes: 0
Received 0 Likes on 0 Posts
Has anyone ever done a boost leak test while holding the throttle OPEN? This is all that really matters. The throttle is never closed when there's full boost.

w8lifter21, do the boost leak test again with the throttle open. If it still leaks, THEN there's a problem. If not, then don't worry about it.
Old Nov 13, 2007, 06:29 PM
  #6  
EvoM Guru
iTrader: (8)
 
RazorLab's Avatar
 
Join Date: Aug 2003
Location: Mid-Hudson, NY
Posts: 14,065
Received 1,038 Likes on 760 Posts
Originally Posted by JKav
Has anyone ever done a boost leak test while holding the throttle OPEN? This is all that really matters. The throttle is never closed when there's full boost.

w8lifter21, do the boost leak test again with the throttle open. If it still leaks, THEN there's a problem. If not, then don't worry about it.
Every single boost leak test I have done with failed throttle body seals leak with the throttle closed or open. Just my personal experience. I've had some so bad they wouldn't even hold 5psi.
Old Nov 13, 2007, 09:17 PM
  #7  
Evolving Member
 
LoBoost's Avatar
 
Join Date: Jun 2007
Location: Huntington Beach CA
Posts: 119
Likes: 0
Received 0 Likes on 0 Posts
With less then 3000 miles on my car my throttle body seals leakedt only 3psi opened and closed,replaced them with works 25psi seals and it holds boost way better.
Old Nov 13, 2007, 09:24 PM
  #8  
Evolved Member
iTrader: (55)
 
Evoryder's Avatar
 
Join Date: Apr 2004
Location: ☼ Florida ☼
Posts: 7,383
Likes: 0
Received 10 Likes on 10 Posts
Throttle body seal...fun lil project... got mine from WORKS... high pressure seals.

Old Dec 16, 2007, 04:25 PM
  #9  
Former Sponsor
iTrader: (12)
 
diiirk@AwdMotorsports's Avatar
 
Join Date: Oct 2005
Location: ft lauderdale
Posts: 868
Likes: 0
Received 0 Likes on 0 Posts
will there be a significant power loss with this leak. i leak tested my car and couldnt get passed 5 psi. it was coming out of the TB. Boost holds rock solid though?
Old Dec 16, 2007, 04:33 PM
  #10  
EvoM Guru
iTrader: (8)
 
RazorLab's Avatar
 
Join Date: Aug 2003
Location: Mid-Hudson, NY
Posts: 14,065
Received 1,038 Likes on 760 Posts
Originally Posted by diiirk
will there be a significant power loss with this leak. i leak tested my car and couldnt get passed 5 psi. it was coming out of the TB. Boost holds rock solid though?
Your turbo is overspinning to meet the requeted boost levels. So while your gauge says the same boost, the turbo is spinning overtime to meet the same boost levels with that leak.

in other words, your turbo hates you.
Old Dec 16, 2007, 04:39 PM
  #11  
Former Sponsor
iTrader: (12)
 
diiirk@AwdMotorsports's Avatar
 
Join Date: Oct 2005
Location: ft lauderdale
Posts: 868
Likes: 0
Received 0 Likes on 0 Posts
well then maybe that can possibly explain why my turbo spool sounds alot louder. and why i feel like im boosting but not really making much power
Old Dec 16, 2007, 04:53 PM
  #12  
Evolved Member
iTrader: (64)
 
evovin's Avatar
 
Join Date: Jan 2007
Location: Florida
Posts: 3,377
Likes: 0
Received 0 Likes on 0 Posts
good info here!
Old Dec 16, 2007, 06:04 PM
  #13  
Evolved Member
iTrader: (9)
 
LayinLo's Avatar
 
Join Date: Dec 2006
Location: Alabama
Posts: 617
Likes: 0
Received 0 Likes on 0 Posts
Gonna have to replace mine too.
Old Dec 24, 2007, 06:47 AM
  #14  
Evolving Member
Thread Starter
iTrader: (10)
 
w8lifter21's Avatar
 
Join Date: Aug 2007
Location: Lake County, IL
Posts: 210
Likes: 0
Received 1 Like on 1 Post
Can these leaky seals be the reason why I only get 14.5mpg city and 16mpg highway? I only have a filter and HKS turbo back.
Old Dec 24, 2007, 08:29 AM
  #15  
Newbie
 
asr10 user's Avatar
 
Join Date: Dec 2007
Location: so cal
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
Is a leaking throttle body a common issue?


Quick Reply: Boost Leak from Throttle Body?



All times are GMT -7. The time now is 12:14 AM.