Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

P0446 - Evap Emission Control System Vent Circuit Malf

Thread Tools
 
Search this Thread
 
Old Jun 9, 2009 | 02:35 PM
  #16  
Jacoby's Avatar
Newbie
 
Joined: Aug 2005
Posts: 86
Likes: 0
From: Chi City
bump.. having the same issue. anyone else fix this problem? if so how..
Reply
Old Jun 10, 2009 | 11:26 AM
  #17  
Jacoby's Avatar
Newbie
 
Joined: Aug 2005
Posts: 86
Likes: 0
From: Chi City
anybody? I will give you $5 and a snickers bar if you help
Reply
Old Sep 28, 2009 | 10:16 AM
  #18  
Jacoby's Avatar
Newbie
 
Joined: Aug 2005
Posts: 86
Likes: 0
From: Chi City
Thumbs up

Sooooo..

By searching the **** out of this place and finding both the service manual instructions and suggestions on the ecuflash forum.. I finally "fixed" my cel caused by P0446..

I took out every solonoid and tested it and they were all ok.. The wiring was also good. (service manual has you check these.)

So it had to be the ecu.

To fix this I ordered the elusive and out of stock tactrix 2.0 and used openecu to change the base flash..

I had to set FCA periphery bit 15 to 0 and did the emissions hack found here..

The only problem is that I think it worked too good.. It makes the car pass every test and a talented inspector will catch it.. Per my original inspection sheet the EVO should list the following tests as not supported.. With the hack they came up as "ready"

Secondary Air system - should be not supported
A/C refrigerant - should be not supported
Heated catalyst - should be not supported

Anyway I am back on the road and hope this helps someone with the same issue.

Last edited by Jacoby; Sep 28, 2009 at 10:19 AM.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
fostytou
Evo How To Requests / Questions / Tips
359
Oct 23, 2025 09:54 AM
fireroasted
ECU Flash
1
Aug 31, 2013 09:52 AM
Nic Money
ECU Flash
9
Mar 22, 2012 12:20 AM
mrfred
ECU Flash
9
Aug 17, 2011 01:30 AM
BadazzCR
Evo Engine / Turbo / Drivetrain
3
Aug 23, 2008 07:40 AM




All times are GMT -7. The time now is 04:24 PM.