35r anti surge compressor housings.
Evolving Member
Joined: Mar 2005
Posts: 486
Likes: 0
From: 900 pounds lighter than a X.
Awsome then we should meet up soon,I am waiting for some new headlights this week with a Intake duct straight through the drivers headlight.And mirrors cause someone bought mine.
Glad the picture of my car helped you out. 
BTW, it wasn't that slow 
Also, my compressor housing is turned upside down. It has writing on it just not quite the same. As far as I know, its a Garrett compressor housing.
BTW, it wasn't that slow Also, my compressor housing is turned upside down. It has writing on it just not quite the same. As far as I know, its a Garrett compressor housing.
Evolving Member
Joined: Mar 2005
Posts: 486
Likes: 0
From: 900 pounds lighter than a X.
slorice
look at your pic. it has righting on the side part of the comp housing.
look at scorke's pic it has righting on the hole outside of the housing. still different. hum.
look at your pic. it has righting on the side part of the comp housing.
look at scorke's pic it has righting on the hole outside of the housing. still different. hum.
Last edited by EvoDan2004; Feb 1, 2008 at 08:54 AM.
Those are all T04S comp housings, and they all started life as Garrett pieces. Then the port gets machined by Tial, Precision, et al, after the fact. Not all ports are created equal.
The reason the markings on the housings differ somewhat is because Garrett sources the castings from a few different foundries. The housings vary somewhat in appearance (surface finish and those markings), but they are all made to the same specifications.
The reason the markings on the housings differ somewhat is because Garrett sources the castings from a few different foundries. The housings vary somewhat in appearance (surface finish and those markings), but they are all made to the same specifications.
Those are all T04S comp housings, and they all started life as Garrett pieces. Then the port gets machined by Tial, Precision, et al, after the fact. Not all ports are created equal.
The reason the markings on the housings differ somewhat is because Garrett sources the castings from a few different foundries. The housings vary somewhat in appearance (surface finish and those markings), but they are all made to the same specifications.
The reason the markings on the housings differ somewhat is because Garrett sources the castings from a few different foundries. The housings vary somewhat in appearance (surface finish and those markings), but they are all made to the same specifications.
o cool. thanks
