Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

which meth kit to get to hit my 500hp goal

Thread Tools
 
Search this Thread
 
Old Mar 19, 2008 | 03:31 AM
  #1  
spooch's Avatar
Thread Starter
Evolving Member
iTrader: (4)
 
Joined: May 2007
Posts: 207
Likes: 0
From: Watertown Connecticut
which meth kit to get to hit my 500hp goal

Alright guys ive done alot of searching and have not come up with the best solution

I have an 03 evo that basically is sitting close to 350whp. I had it witha 20g-lt on it and took it all off and decided for the ets 57

I have the following items to put on

Ets 57 trim kit
arp head studs
arp rod bolts
Ebay clone fmic
Buschur Uicp
Brian crower 272s
Act Hdss clutch kit
rsr gt2 3 inch test pipe back
walbro 255
stock ecu, stock maf


Have not ordered injectors yet, i am 90% sure im going to get 880cc's

The car is my daily driver, id like to be able to hit 500whp with 93 oct and 100% meth injection. Obviously I wouldnt be driving around all day with 30psi but Id like to make 500 on the dyno and If i had to use race gas with meth to get it, so be it

Which meth kit is the most reliable ? Which one do you recommend to me, I dont want it to fail so I'm not going to go with a cheap used kit. Thanks
Reply
Old Mar 19, 2008 | 05:07 AM
  #2  
deadbeatrec's Avatar
Evolved Member
iTrader: (9)
 
Joined: Jan 2005
Posts: 3,139
Likes: 0
From: Albany, NY
Originally Posted by spooch
Alright guys ive done alot of searching and have not come up with the best solution

I have an 03 evo that basically is sitting close to 350whp. I had it witha 20g-lt on it and took it all off and decided for the ets 57

I have the following items to put on

Ets 57 trim kit
arp head studs
arp rod bolts
Ebay clone fmic
Buschur Uicp
Brian crower 272s
Act Hdss clutch kit
rsr gt2 3 inch test pipe back
walbro 255
stock ecu, stock maf


Have not ordered injectors yet, i am 90% sure im going to get 880cc's

The car is my daily driver, id like to be able to hit 500whp with 93 oct and 100% meth injection. Obviously I wouldnt be driving around all day with 30psi but Id like to make 500 on the dyno and If i had to use race gas with meth to get it, so be it

Which meth kit is the most reliable ? Which one do you recommend to me, I dont want it to fail so I'm not going to go with a cheap used kit. Thanks
first off 880cc's are too big. no need for that much injector. u are just going to make it harder for your tuner to tune them.

secondly, as far as alky kits are concerned, i like my HFS-1 aquamist. great quality.
Reply
Old Mar 19, 2008 | 06:44 AM
  #3  
KevinD's Avatar
Former Sponsor
iTrader: (56)
 
Joined: Sep 2004
Posts: 2,701
Likes: 0
From: DFW, TX
may i suggest:

https://www.evolutionm.net/forums/sh...d.php?t=303228
Reply
Old Mar 19, 2008 | 07:44 AM
  #4  
justboosted02's Avatar
Evolved Member
15 Year Member
Liked
Loved
Community Favorite
iTrader: (31)
 
Joined: Jun 2006
Posts: 1,926
Likes: 14
From: northeast
aquamist hfs-5
Reply
Old Mar 19, 2008 | 07:50 AM
  #5  
xiaoni420's Avatar
Evolved Member
iTrader: (32)
 
Joined: Mar 2005
Posts: 1,675
Likes: 0
From: PottsVegas, PA
Aquamist HFS-1
Reply
Old Mar 19, 2008 | 08:23 AM
  #6  
TTP Engineering's Avatar
Account Disabled
iTrader: (465)
 
Joined: May 2005
Posts: 8,824
Likes: 2
From: Central FL
Many of the fastest stock turbo Evo's for 2008 are using our meth injection systems.
Reply
Old Mar 19, 2008 | 08:31 AM
  #7  
PwrEvo's Avatar
Evolving Member
iTrader: (2)
 
Joined: Apr 2007
Posts: 430
Likes: 0
From: Houston
KevinD's preassembled Aquamist HSF-5, great kit and the easiest install.
Reply
Old Mar 19, 2008 | 10:01 AM
  #8  
spooch's Avatar
Thread Starter
Evolving Member
iTrader: (4)
 
Joined: May 2007
Posts: 207
Likes: 0
From: Watertown Connecticut
so you guys think with the aquamis hsf-5 kit i should have no problem hitting my 500whp goal
Reply
Old Mar 19, 2008 | 10:56 AM
  #9  
KevinD's Avatar
Former Sponsor
iTrader: (56)
 
Joined: Sep 2004
Posts: 2,701
Likes: 0
From: DFW, TX
i'm running the HFS-5 and i make 500whp, so yeah, it wont be a problem at all
Reply
Old Mar 19, 2008 | 10:59 AM
  #10  
scheides's Avatar
EvoM Moderator
iTrader: (10)
 
Joined: Oct 2006
Posts: 4,827
Likes: 13
From: Minneapolis
Aquamist HFS-1 or HFS-5 absolutely nothing else. Read through the install I just did here:

https://www.evolutionm.net/forums/sh...d.php?t=330062

And then if you want it to be painless, Pm ^ KevinD ^ and order one of his pre-assembled setups. I LOVE this kit, I had an SMC before and I am glad I made the switch. Super driveable, reliable, and actual failsafes built in.
Reply
Old Mar 19, 2008 | 11:13 AM
  #11  
StevenStarke's Avatar
Evolved Member
iTrader: (77)
 
Joined: Aug 2007
Posts: 1,405
Likes: 0
From: Li, NY
I personally still stick my SMC failsafe or not, I've never had a problem, nor have any of my customers
Reply
Old Mar 19, 2008 | 11:13 AM
  #12  
SickSilverNLow's Avatar
Evolved Member
iTrader: (5)
 
Joined: Nov 2006
Posts: 4,267
Likes: 0
From: OREGON
Aquamist is pretty good company to go with......you should have no problem making 500whp on meth and pump with that turbo...i hit a little over 400whp with just pump with the ETS 57trim.
Reply
Old Mar 19, 2008 | 11:19 AM
  #13  
staatz's Avatar
Evolved Member
iTrader: (12)
 
Joined: Sep 2005
Posts: 1,591
Likes: 1
From: Danbury, CT
SMC alky, 100% 93 OCT, 618whp SON..Lol

But seriously..on my old evo I had 780cc's and 100% alky and the car made 500whp so you would be fine with whichever alky kit you decided and 780cc's
Reply
Old Mar 19, 2008 | 11:37 AM
  #14  
dafunk630's Avatar
Evolved Member
iTrader: (10)
 
Joined: Apr 2006
Posts: 1,447
Likes: 0
From: USA
SMC here and 501 whp!!!
Reply
Old Mar 19, 2008 | 11:42 AM
  #15  
staatz's Avatar
Evolved Member
iTrader: (12)
 
Joined: Sep 2005
Posts: 1,591
Likes: 1
From: Danbury, CT
Originally Posted by dafunk630
SMC here and 501 whp!!!
AMEN!
Reply



All times are GMT -7. The time now is 10:57 PM.