M3 Cams Results
We'll get you tuned up within the next few days and onto the new record for stock turbo! Glad you like the M3's we sent you thus far.
We have sold countless sets of the M3 Cosworth cams and the initial reports are a slightly more aggressive idle with a noticeable gain in torque. We will soon have some results of our own on the S1's vs the Cosworth M3's on Most-Wanted's car.
We have sold countless sets of the M3 Cosworth cams and the initial reports are a slightly more aggressive idle with a noticeable gain in torque. We will soon have some results of our own on the S1's vs the Cosworth M3's on Most-Wanted's car.
I am very excited about this. Can't wait to see you work the magic
Quote:
Originally Posted by Mitch@VividRacing View Post
For sure. Mods are as follows:
Stock Block
Custom Intake
Stock TB
Mynes Performance GT3076 .63 A/R
I/C Pipes
Intercooler
Forge MBC
Ecuflash
AquaMist HFS-5
Cosworth M3's
The car made 430 before with the other cams at around 26psi. I am hoping to see a better top end with these cams as it was falling off with the Tomei's.
Should be good. We are putting them in right now. I have to tune an 07 Sti then it will go on the dyno after that.
Stay tuned,
Mitch M
i wouldn't call that pump
Quote:
Originally Posted by Mitch@VividRacing View Post
For sure. Mods are as follows:
Stock Block
Custom Intake
Stock TB
Mynes Performance GT3076 .63 A/R
I/C Pipes
Intercooler
Forge MBC
Ecuflash
AquaMist HFS-5
Cosworth M3's
The car made 430 before with the other cams at around 26psi. I am hoping to see a better top end with these cams as it was falling off with the Tomei's.
Should be good. We are putting them in right now. I have to tune an 07 Sti then it will go on the dyno after that.
Stay tuned,
Mitch M
i wouldn't call that pump
Originally Posted by Mitch@VividRacing View Post
For sure. Mods are as follows:
Stock Block
Custom Intake
Stock TB
Mynes Performance GT3076 .63 A/R
I/C Pipes
Intercooler
Forge MBC
Ecuflash
AquaMist HFS-5
Cosworth M3's
The car made 430 before with the other cams at around 26psi. I am hoping to see a better top end with these cams as it was falling off with the Tomei's.
Should be good. We are putting them in right now. I have to tune an 07 Sti then it will go on the dyno after that.
Stay tuned,
Mitch M
i wouldn't call that pump
Wow this thread got a bit out of hand while I was gone.
Sorry I didnt post up sooner but we were here late last night and and I couldnt scan the dyno graph last night.
We learned somethings about the cams and had a good time. We also learned somethings about our dyno and some problems it was having.
Let me go and scan the dyno sheet right now and then I will post up in just a second.
Mitch
Sorry I didnt post up sooner but we were here late last night and and I couldnt scan the dyno graph last night.
We learned somethings about the cams and had a good time. We also learned somethings about our dyno and some problems it was having.
Let me go and scan the dyno sheet right now and then I will post up in just a second.
Mitch
