Drag Car... Start To Finish!
#1
Evolving Member
Thread Starter
iTrader: (28)
Join Date: Feb 2005
Location: Everywhere, Chicago - Washington DC
Posts: 243
Likes: 0
Received 0 Likes
on
0 Posts
Drag Car... Start To Finish!
Well i couldnt hold back anymore, its time the members of EVO M got a chance to see an amazing car build. I made this post so i could put up progess pictures as the car is being built up until its debut next month. Not many people get a chance to see what goes into a serious drag car so this would be a great look into what the big guys go through to break some records.
NOW.. on to the pictures
BONE STOCK gg evo 9 just waiting to be modified
Nice interior... too bad everything is coming out for cage fabrication and structural support!
No more roof!
Right about now some of you are probably about to pass out from what we did to that beautiful evo 9... but did you really think we would leave the car like that? Off to PAINT!!!!!
Carbon roof and trunk....
vr4 rear diff
NOW.. on to the pictures
BONE STOCK gg evo 9 just waiting to be modified
Nice interior... too bad everything is coming out for cage fabrication and structural support!
No more roof!
Right about now some of you are probably about to pass out from what we did to that beautiful evo 9... but did you really think we would leave the car like that? Off to PAINT!!!!!
Carbon roof and trunk....
vr4 rear diff
Last edited by CharlesJ; Apr 18, 2008 at 06:23 AM.
#2
Evolving Member
Thread Starter
iTrader: (28)
Join Date: Feb 2005
Location: Everywhere, Chicago - Washington DC
Posts: 243
Likes: 0
Received 0 Likes
on
0 Posts
Some more progress pictures... watercooled intercooler setup, waterpumps in, charge pipe routed through firewall... its coming together
Tune in for more progress... remember this car is going from zero to hero in 1 month!!!
Tune in for more progress... remember this car is going from zero to hero in 1 month!!!
#5
Evolving Member
Thread Starter
iTrader: (28)
Join Date: Feb 2005
Location: Everywhere, Chicago - Washington DC
Posts: 243
Likes: 0
Received 0 Likes
on
0 Posts
apparently it was advertising a shop so hopefully this thread doesnt close because im sure a lot of people want to see the hard work that goes into building an all out drag car from a bone stock evo.
Trending Topics
#11
Evolving Member
Thread Starter
iTrader: (28)
Join Date: Feb 2005
Location: Everywhere, Chicago - Washington DC
Posts: 243
Likes: 0
Received 0 Likes
on
0 Posts
as far as the head goes, we are working on a unique intake manifold cnc'd ported cylinder head that is specifically designed to work with each other.... so far the cfm #'s look VERY PROMISING... we will release further specs once the testing is finalized.