heys guys just what the title says i would like to know what cams are best for a daily driven evo 9 mr with a ETS turbo kit and a FP GT3076HTA Ball Bearing Turbocharger

will have supporting mods and a good tune... just lil unsure of cams..

i come from a dsm and i lov the BC cams and set

are BC good cams or would S2 cams be better or hks?

any help would be great thanks guys

search'd but still a lil fuzzy

anyone wiht s2 please put ur .02 in the pot

 

I have cosworth M2's in mine. No problem as DD street driven so far.
Idle is kind of rough on the stock ecu but I can have it fine tuned.
Not too much low end, but lots of mid-range and top end.
The car pulls all the way to the redline.

S2's are bigger than Cosworth BTW.

 

i have a buschur hta 3076 .82 and are installing cossie m3 next wk end.
cant go wrong with gsc s2 or cossie m2 or the new m3's..all agood choice imo.

 

thanks guy i never even considered cosworth or cossie i guess i will have to look them up

 

keep them coming

 

i got a 2.3 with a AFI 35r kit and i got cosworth M2's there sweet

 

Get either GSC S2's or Cosworth M2/M3's ..

 

how is the idle on the m2 m3?

my bc 280 were a lil rough even with a decent tune

 

I can't say for sure how they will idle on 2L, but from what I hear, cosworth M2's have near stock idle on evo IX.

I have headwork done also, so the idle is little rough, but nowhere near as lumpy as some of the VIII's with 280's.

 

Im running S2s and i love them. On my stock turbo i lost a little spool, up to around 3800ish, but they really feel good 4k+ rpms. I havent had the car on the dyno so i cant say how much they added, but its noticeable. Ive really been considering a HTA 3076, how do you like the power vs lag?

 

i have been leaning towards the s2 form all the people who have been make great gains with them..but im not going to cut out the cosworth just yet

to be honest i never driven a car with that turbo in it but i have rode in my friends 97 gsx with it and i got say why better feeling then any garret or so i felt befor...

spools roughly 4 to 600 sooner then any other 3076 i seen...

great turbo

+1 FP hta

 

any other cams out there that people want me to consider???

 

br272

 

I'm going with S2's for my twin scroll hta35r

 

i was leaning towards the s2 but i was just informed that FP makes cams also anyone have any imput on these cams?

thanks 4 the help guys