EVOLUNCHBOX's build, big power.

Subscribe
May 12, 2008 | 11:27 AM
  #1  
We have Nick's car back here for some work. I posted pictures of his roll bar a few weeks ago.

Since then we finished up some of the other work he wanted to have done. Lightweight center member, mustache bar, rear diff mounts, roll bar padding, driveshaft loop etc.

We also put the Hypertune Intake on the car with the Hypertune 3" TB. Last time it was here the car was tune on VP Import and it made 620 whp.

This time I tuned the car on Q16, 38 psi of boost (did not hit 39 psi). I just made 685 whp and 567 ft lbs of torque with the car.

This is the highest HP EVO we've built that didn't have a GT42r on it (my car excluded).

I will be tuning it on pump/alky here in a few minutes but wanted to get this dyno sheet posted first.



Details on the build:

BR Stage 3, 2.3 liter
BR Stage 3 head
Jun 272 cams
BR 67 P trim turbo kit, header
BR 3" turbo back
BR race fmic
BR upper and lower 2.5" i/c pipes
BR battery kit
1200 cc injectors
SMC alky kit (not used on race gas)
BR double pumper
5 point roll bar
BR Mustache bar
BR Center member bar
BR Diff support mounts
Tilton clutch
AEM EMS
Hypertune intake
Hypertune 3" throttle body
BR drive shaft loop
BR Coil on plug ignition
BR fuel rail
BR dual Stage boost controller
BR launch controller

Thanks for reading. I will post the pump/alky sheet as soon as I am done with the tune.
Reply 0
May 12, 2008 | 11:31 AM
  #2  
Awesome! I can only imagine what that car feels like. I cant wait till next week when I get my Buschur tune!!
Reply 0
May 12, 2008 | 11:31 AM
  #3  
Wow. Those are nice numbers indeed. That stroker is doing a good job of getting that turbo moving.
Reply 0
May 12, 2008 | 11:33 AM
  #4  
I can't tell you how happy I am! Thank you so much for always taking such good care of my car and transforming it into an animal! As soon as I get it back to Ga I am headed to the strip for some new times. You know my goal and I’m not stopping until I hit it.

Thanks to everyone at Buschur Racing for putting up with me and consistently making my mouth hit the floor! HA! Awesome job!
Reply 0
May 12, 2008 | 11:39 AM
  #5  
Thanks David your killing me, I now have for sale a new Green turbo, o2, ex manifold, thanks a lot pal . EVOlunchbox great build .
Reply 0
May 12, 2008 | 11:50 AM
  #6  
Great lujchbox..BUSCHUR POWER BABY!!!
Reply 0
May 12, 2008 | 11:54 AM
  #7  
Quote: Thanks David your killing me, I now have for sale a new Green turbo, o2, ex manifold, thanks a lot pal . EVOlunchbox great build .
Thank you and thanks for all the innovative tech. you are bringing to the table. I hope to be running some of your pieces some day.
Reply 0
May 12, 2008 | 12:52 PM
  #8  
sick!!!
Reply 0
May 12, 2008 | 12:56 PM
  #9  
IMO the 67p trim truly is the baddest t3 turbo on the market still.. Nice work Dave!!
Reply 0
May 12, 2008 | 12:57 PM
  #10  
Congratulations on the new found power you got there Nick!!!!!!

And David great job on the car!!

All of these cars is truly making me a bit impatient but my day will come!

Nick when are you coming back thru the Burgh. Wanna see the beast again
Reply 0
May 12, 2008 | 03:43 PM
  #11  
thatss crazzy
Reply 0
May 12, 2008 | 03:50 PM
  #12  
Whats the BR launch control? Is that serperate from the ems launch control?
Reply 0
May 12, 2008 | 04:50 PM
  #13  
Quote: I will be tuning it on pump/alky here in a few minutes but wanted to get this dyno sheet posted first.
...
Thanks for reading. I will post the pump/alky sheet as soon as I am done with the tune.
Was this posted?
Reply 0
May 12, 2008 | 05:26 PM
  #14  
FOCK
Reply 0
May 12, 2008 | 05:34 PM
  #15  
i have to stop signing on evolutionm because every time i sign on i see buschur this and that and alll it does make me go crazier about my car thanks dave and everyone buschur for this good virus thats going around ...ftw buschur power
Reply 0