Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

TTP Built Stock Turbo 433 whp 497 wtq

Thread Tools
 
Search this Thread
 
Old Jul 25, 2008 | 06:38 PM
  #1  
Evo2wIsh4's Avatar
Thread Starter
Evolved Member
iTrader: (12)
 
Joined: Mar 2007
Posts: 543
Likes: 0
From: South Orlando
TTP Built Stock Turbo 433 whp 497 wtq

I just wanted to say thanks to all of the crew at TTP-E. Ryan for all the hard work and efforts he has put on my car. Scott for the amazing tuning and all the help he has provided through out my build. Hugo, even if you came late to the team you are still appreciated.

All the parts and installs have been done at TTP by their recommendation. They know what they are doing and right now is the place to bring your Evo.

It has crossed my mind many times to upgrade my stock turbo for the Green, but to tell you the truth with this much torque and power I dont think I need to upgrade.

Boost hits hard and early and even if the torque drops off the car has built so much momentum that the Hp just picks up and it feels great.

At the end of tuning the car ended up with 372hp and 408tq on Pump 93 and 433hp and 497tq With the Meth on.

Mods.


TTP CUSTOM TUNE
TTP METHANOL INJECTION KIT
WISECO PISTONS
EAGLE H-BEAM RODS
SUPERTECH VALVE SPRINGS
CALICO RACE BEARINGS
MEGAN RACING CAT-BACK
MEGAN RACING DOWN PIPE
MEGAN RACING TEST PIPE
MEGAN RACING 02 HOUSING
AMS COPY FMIC
COSWORTH 272 M2 CAMS
FIDANZA CAM GEAR
HALLMAN MBC(35PSI)
INJEN INTAKE
INJEN UPPER/LOWER IC PIPES
GREDDY TYPE RS BOV
ACT/TTP HDSS CLUTCH
ACT STREETLITE FLYWHEEL
SS BRAIDED CLUTCH LINES
ZEITRONIX WIDEBAND/BOOST/EGT/ZAVT/FAILSAFE
ARP HEAD STUDS
WALBRO 255LPH FUEL PUMP
STOCK MANIFOLD
STOCK WG ACTUATOR


93 Oct Tune 372whp 408wtq





93 Oct+Meth Tune 433whp 497wtq





1/4 Mile Run 11.22 @ 119 mph




Vid




The car feels awesome in the street. The torque is just plain fun

Last edited by Evo2wIsh4; Aug 9, 2008 at 06:39 PM.
Reply
Old Jul 25, 2008 | 06:42 PM
  #2  
apagan01's Avatar
Account Disabled
iTrader: (299)
 
Joined: Dec 2006
Posts: 4,863
Likes: 5
From: digging for oil
where the frwak all that torque comming from ?/?
Reply
Old Jul 25, 2008 | 06:44 PM
  #3  
BlueDemon's Avatar
Evolved Member
iTrader: (22)
 
Joined: Jan 2006
Posts: 1,438
Likes: 0
From: Kissimmee, Fl
Showing off the beast huh, I need a ride the next time I see ya!

Scott @ TTP has the perfect formula to take full advantage of our stock turbo. I think is time to see some 500+whp evos on pump gas coming out of the shop pretty soon .
Reply
Old Jul 25, 2008 | 06:47 PM
  #4  
whitey4d's Avatar
Evolved Member
iTrader: (1)
 
Joined: Sep 2005
Posts: 751
Likes: 0
From: Harpers Ferry,WV
Whats up with the 1.405 60 ft time? The MPH might be accurate but the ET can not be imho.

Id love to see that ET backed up. (seriously not being sarcastic)
Reply
Old Jul 25, 2008 | 06:47 PM
  #5  
AWD Motorsports's Avatar
Former Sponsor
iTrader: (211)
 
Joined: Jun 2007
Posts: 9,665
Likes: 1
From: South Florida
Nice man!!!Some good power and ungodly TQ!! 1.40 60ft is better than i have ever gotten in my car running 9.3's.. LOL
Reply
Old Jul 25, 2008 | 06:50 PM
  #6  
apagan01's Avatar
Account Disabled
iTrader: (299)
 
Joined: Dec 2006
Posts: 4,863
Likes: 5
From: digging for oil
Evotowish,,,,, i think you were the one that usto say ( the car pulls like a freight train ) everytime you installed something new on the car



hey now you can say it again
Reply
Old Jul 25, 2008 | 06:52 PM
  #7  
BlueDemon's Avatar
Evolved Member
iTrader: (22)
 
Joined: Jan 2006
Posts: 1,438
Likes: 0
From: Kissimmee, Fl
Originally Posted by whitey4d
Whats up with the 1.405 60 ft time? The MPH might be accurate but the ET can not be imho.

Id love to see that ET backed up. (seriously not being sarcastic)
He stayed on 4th gear on that run, probably reving it up to 8,000 rpm. Remeber that 4th gear on a six speed evo 9 is really short .
Reply
Old Jul 25, 2008 | 06:53 PM
  #8  
Evo2wIsh4's Avatar
Thread Starter
Evolved Member
iTrader: (12)
 
Joined: Mar 2007
Posts: 543
Likes: 0
From: South Orlando
Originally Posted by apagan01
Evotowish,,,,, i think you were the one that usto say ( the car pulls like a freight train ) everytime you installed something new on the car



hey now you can say it again
Lol Now I can really say it! This thing pulls like a freight train!!

Mike, Yeah 1.4 60' was crazy but it does help that the car is strapped down on the dyno

Ramon, I had to do it!
Reply
Old Jul 25, 2008 | 06:55 PM
  #9  
whitey4d's Avatar
Evolved Member
iTrader: (1)
 
Joined: Sep 2005
Posts: 751
Likes: 0
From: Harpers Ferry,WV
Originally Posted by BlueDemon
He stayed on 4th gear on that run, probably reving it up to 8,000 rpm. Remeber that 4th gear on a six speed evo 9 is really short .
I was talking about the drag pass. I cant beleive it would go to a track and pull a 1.40 thats all. Im not trying to take anything away from the power the cars making.
Reply
Old Jul 25, 2008 | 07:02 PM
  #10  
BlueDemon's Avatar
Evolved Member
iTrader: (22)
 
Joined: Jan 2006
Posts: 1,438
Likes: 0
From: Kissimmee, Fl
^ Maybe with some drag radials and the blessing from Turbo God?
Reply
Old Jul 25, 2008 | 07:09 PM
  #11  
Ph3n1x's Avatar
Evolved Member
iTrader: (12)
 
Joined: Aug 2005
Posts: 2,251
Likes: 0
From: ¯\(º_o)/¯
Very nice Felixio
Reply
Old Jul 25, 2008 | 07:39 PM
  #12  
Evo2wIsh4's Avatar
Thread Starter
Evolved Member
iTrader: (12)
 
Joined: Mar 2007
Posts: 543
Likes: 0
From: South Orlando
Originally Posted by Phenixfyah
Very nice Felixio

Reply
Old Jul 25, 2008 | 07:44 PM
  #13  
Illrunya's Avatar
Evolving Member
iTrader: (7)
 
Joined: Oct 2003
Posts: 396
Likes: 0
From: NY
Nice numbers! What compression are you running with those pistons?
Reply
Old Jul 25, 2008 | 07:45 PM
  #14  
SHhhhh's Avatar
Evolved Member
iTrader: (73)
 
Joined: Jan 2004
Posts: 1,157
Likes: 1
From: FL
Nice numbers. I think it is definitely broken in now!
Reply
Old Jul 25, 2008 | 07:50 PM
  #15  
Evo2wIsh4's Avatar
Thread Starter
Evolved Member
iTrader: (12)
 
Joined: Mar 2007
Posts: 543
Likes: 0
From: South Orlando
Originally Posted by Illrunya
Nice numbers! What compression are you running with those pistons?
9:1
Reply



All times are GMT -7. The time now is 11:22 AM.