Can anyone tell me the size of the coupler used in this picture https://secure.buschurracing.com/cat...Delux1site.JPG I need to know the size of the pipe that is bolted to the compressor cover.(The pipe in the pic is attached to the buschur licp) Im dying to put on my fmic but I got it used and need that coupler. Thanks

 

Another pic to show what im referring to https://secure.buschurracing.com/cat...a9e627cf48396e (The small side of the coupler closest to the top of the pic)

 

Anyone? I know someone can help me so we can close this thread. Thanks

 

 

I figured the forums would be easier. Thanks

 

Can any vendors comment on my question? Anyone?

 

Bump for answer.

 

I bet it's 2". Maybe 1.75" or even 1.5" though. It would be easiest to call Buschur Racing.

 

Just to keep you from bumping this thread , I'll make this simple for you.

The Buschur LICP kit is designed to go FROM THE STOCK EVO discharge pipe to the intercooler, which you can read from the Buschur description on their website. The stock Evo discharge pipe from the compressor cover is 1.75 inches internal diameter at the end where the LICP will attach.

 

So the pipe in the pic(small side) isnt stock? All i have for the licp is a 2.5inch bend. Am i missing a pipe? Thanks

 

It's impossible to know what you have without a picture. The two pictures you posted are different. The first picture is a one piece pipe; the second picture you posted is a two piece pipe with a joint in the middle. You have to look at the pictures and figure out which parts you have. Take what you have, hold it up under your car in the correct location, and you'll see very quickly what you have and what you're missing.

 

co-vr4 thanks for all your help. Mods please close thread.