Well at 5am we are here at the shop trucking along with one of our customers cars we just did an FP Red Install on amongst many other mods.. Preliminary Tuning shows already on the 2nd pull 446whp@22psi on Pump Gas.. Below is the video I just took on 22psi pump gas.. Ill keep you guys updated as things progress and we move forward to E-85 tuning Tomorrow or should i say later today..

Youtube Video
http://www.youtube.com/watch?v=Jq96j5DwttI


Setup is below..

EVO IX
FP RED w/ Forge WGA
HKS DLI
Ported Stock Exh. Manifold
Buschur Ported Intake Mani + TB
Buschur Deluxe FMIC + UICP
Buschur Fuel Rail w/ FPR
Full-Blown Double Pumper
AWD Custom Intake
Supertech Springs and Retainers
GSC s2 Cams
Precision 1200cc Injectors
Evo Power Mods 02 Dump
AEM.. Tuned By Crispeed




vs. RPM

 

good #'s for 22lbs

 

nice numbers

 

Added on a dyno chart a couple pulls after.. still 22psi..

 

Great numbers. He has all the mods to compliment E85!! I can't pull up youtube @ work. What type of dyno is this performed on?

This is just a basic ported intake manifold. Not the Wilson, correct?

 

Can't open the vid. Great power. I think this the full bolt on - pump gas red running car everyone was asking for (exept for aem...). This will make alot of people happy

Had this power level been achieved at 28psi, it would still be very impressive. the fact it was achieved at only 22 psi makes it SICK.


Congrats

 

This done w/ Buschur Standard ported manifold.. Its on a dynojet 424x..

 

Thanks!! I was amazed it was on 22psi as well.. Sure enough in the log it was 22psi.. I wanted to do it on pump gas even though we will run E-85 on it just to show you guys the potential on pump.. A lot of the reds have been on race gas and didnt have pump #'s to show.. I am sure we could get more but since we are going E-85 and its the same price as pump well stop here for now..

 

Great #'s

 

Awsome Mike!!! And only at 22 psi... This is a sick turbo

 

You are up on a dyno at this time of the morning? And posting results?

I found a new level of respect for ya Mike!

Congrats on the #'s.

 

Great job Mike! Your Wilson v2 will be ready later today, Good Luck, Jim

 

 

Nice! Do want FP Red!

 

Wow Excellent