DSMer...

That's cool. I already purchased the Kelfords 272's though, but still want to see results.

A4 TSCHUSS

Just want to bump this thread. Has the S262 been tested yet? It is hot now!!!! Well in Florida it is atleast

I have a Audi A4 and have been interested in the S262 or S362 but nobody runs them (like 1 guy has a S256, everyone else uses Garrett). I figured the Evo would be my closest match due to 2 liter like me and awd (you guys have a better flowing head though).

So I am very interested in what comes from this S262 test/dyno to compare with the previously tested turbos. I currently have a GT3076 .63 a/r and am ready to step up to something bigger.

MOREPSiTEHBETT4

wow, that stock turbo ix you guys tuned was nuts...360whp on a mustang dyno with teh stock turbo..that car must be nuts on the street, i guarantee it would beat most 35r'd mediocre drivers at the track/street

Domolution

iTrader: (74)

Good numbers mang!! Not bad at all.....[:
WEEE!!!

Levar

iTrader: (85)

Bottom line fellahs, is that I was told that I could buy a flange in order to run the Borg Warner T04B 57-trim with the stock exhaust manifold. Is this true?

_mcjonnyp

iTrader: (8)

sorry to dig this thread back up from the dead.. but i fit a full 3" downpipe on a .70 housing with an s256

DREVO978

iTrader: (4)

awesome numbers.. not bad.. this turbos are the sh*t..lol.. i have an s256 with a 55a/r.. running 29psi on 93 daily driver.. with cutout open i hit full boost just around 4200.. my motor is completely stock besides the kelford 272s and just bolt ons.. their good turbo and fun for street car.. sound inzane too...

_mcjonnyp

iTrader: (8)

We'll be testing a billet bullseye power s362 here shortly

For comparison my car made 490 to the tires on a s256, t3 .70 a/r on a 100% stock motor.
bullseye power/ borg warner/ airwerks definitely make some of the best turbos out there, still not too sure why they haven't caught on in this community.

Dynotech Tuning

iTrader: (12)

This is one of the only threads I could find online with results of the BW259. Was looking to compare results. I know its not and Evo but its still a 4G63!

We Dyno tuned a 99 GSX today on 93 pump gas made 547 HP 468 TQ

2.0L
9.0:1
HKS 272's
Ported Head
Kiggly S/R
JMF Drag manifold
DNP T3 header
BWS259 .70 A/R 3" V-band
TiAL MVR
TiAL BOV
Dual Walbro 255
FIC 1050cc

39 psi falling to 32 psi.

All I have it the 531 HP 461 TQ graph right now. This turbo is pretty impressive it surprised me today!

[/URL]

mean4g63

iTrader: (3)

reviving an old thread..... I used to have a built evo 3 (same as 7 bolt dsm) with the borg warner S259 with the BEP .55AR turbine housing, with meth+93 right at 500 WHP. Car saw 20 psi @4200 and 30 psi @4500-4600. Anyways I always wondered why the borg's never really caught on in the evo community. I am dying to see a billet and or Batmo S259 on an evo. Aparantly they spool and flow even better than the old cast versions like I had. It would be an interesting competator to the other T3/T4 configurations out there for the evo.

5speedwtneed

iTrader: (9)

Interesting results. Im anxious to do a few more mods and come back to turn my FP green up to 30 PSI. Just trying to make sure I don't do any mods to ruin the setup I'm looking for.

NoLiMiTS23

Hey all! I was running a BEP s259 batmo. We made 568hp/513tq. On a 2.3L EVO VIII running e85