did anyone use jun stroker with gt40 or gt42 turbo? they're saying this kit is capable about 650hp and 8500rpm.i want billet crank and revving little high.and what kind of other billet cranks revved high?(tomei,magnus,bc). what kind of periods are ams, buschur engines rebuild?(not all time racing)

does anyone know ams and buschur stroker specs? max. rev, power outputs,balance shaft machining etc.

and if you choose, which stroker do you buy?

 

This is my kit, Made by Arrow and Cp pistons, Very expensive but very strong,



Mark

 

k1 all the way.Very strong crankshaft and perfect balanced!I have it on my 2.0l.

 

go with K1

 

The K1 is a nice crank. Anyone here try the Magnus cranks?

 

Top combination!!!!!!!
Very special material & perfect manufacturing(Arrow).

 

Beauty pieces, do they do a knife edged crank? Those counterweights look a little solid.

 

Yes they do, That crank was made to be as strong as you could make it, Its not a light weight race crank which they can do,
The crank was also designed for those rods and pistons weight another reason for those counter balancers.

Mark

 

They make a very special one with 4 counterweights,just amazing(like their titanium con rods)

 

I have a 2lt at work, I will get a picture of it tomorrow.

Mark

 

+1 for the K1 can't go wrong there

 

what about magnus crank?

also what is safe max rpm for ams and buschur kits?

 

What about an Eagle Mark?

 

This says it all, And this is the second I have seen like this.




Mark

 

The pic about the 4 counterweights Crank plz.............