My stock clutch and tranny are out, but I don't have any torque specifications for the bolts to the Exedy flywheel and twin plate clutch. Please, if you've done the install or have US instructions, let me know!

 

Nevermind, I got them, but for those who want to know:

Flywheel : 98 ft-lbs
Pressure-Plate : Stock Torque Specifications

 

wow AvatarOfWar,

are you fixing in your own clutch?? If you are, could you take some pictures? I intend to be changing my own clutch too.

 

It would be awesome as all hell to have a write up about this. Save me hundreds!!

 

Where did you find the american instructions? They told me that they didn't have any. I had the dealer do mine since they were replacing a part on the tranny already and they didn't charge me but one hour of labor since the rest was warranty work.

Just as a point of review--I am loving the new clutch! It is tons better than the stock clutch. I have driven a friend of mine's car with the ss line and it really does not compare to what the new clutch will do. The SS line is nice, and I still plan on doing it in conjunction with my new clutch, but you cannot get a twin plate feel without the twin plate. Has some slight chattering when engaged but the installer mechanic said I could bring it back in and have it realigned after break in and most of that would go away.

 

its close to impossible to get some english instructions, last time I had them translated by Boabob from this forum , really cool guy