Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

ask for how to use blitz SBC-ID

Thread Tools
 
Search this Thread
 
Old Sep 28, 2003 | 11:50 PM
  #1  
teddy's Avatar
Thread Starter
Newbie
iTrader: (21)
 
Joined: Sep 2003
Posts: 60
Likes: 0
From: CA
Exclamation ask for how to use blitz SBC-ID

hi everybody i have some question to ask ,seem i install the SBC-ID on my EVO ,but i have some problem need to ask ,first when i go to the boost set up ,i use the Channel on OFF ,but when i push the gas i just see the boost gauges read the peak is around 10.5-11 psi,and i think the car is slower than the stock ,so is this right if i turn the ebc in off mode,becasue i see the manual if i but the boost on OFF mode it will be in turn to stock ,but they said the ebc cannot go below the stock boost pressure becasue i see some body said the stock boost is 19psi but why my can is more slower than i but the SBC on my car,and did you know how to set the SBC and the stock boost is what psi because i don't know how to set it up because this is my first turbo car ,and one more question when i install the SBC ,when i push the gas to about 2500rpm and up(when the turbo kick in) i heard some valve sound or motor sound is come form the SBC SOLENOID UNIT (is like fast da da da sound)until i release the gas ,so is this normal or have some problem.

thank for every people to help me
Reply
Old Sep 29, 2003 | 10:34 AM
  #2  
Jinu0808's Avatar
Evolving Member
iTrader: (1)
 
Joined: Jul 2003
Posts: 196
Likes: 0
Ok the Ticking SOund is normal I got it too so dont worry,

Use the below setting to play with

Set 50
Gain 5

And now you should hit somewhere like 16 17 PSI
now raise set higher and reach desire boost level.

P.S. When u turn the EBC off its normal for the car to hit 10PSI since thats what our wastegate is set at I think.

Good luck anymroe question just post
I'll try my best to help you set it up, I am a NEWBIE just like you hahaha so I know how frustated it is setting this thing.
Reply
Old Sep 29, 2003 | 10:36 AM
  #3  
Jinu0808's Avatar
Evolving Member
iTrader: (1)
 
Joined: Jul 2003
Posts: 196
Likes: 0
Also try to use 3rd or 4th gear to set it up cuz 1st gear is just too fast AND short.
Reply
Old Sep 29, 2003 | 07:05 PM
  #4  
teddy's Avatar
Thread Starter
Newbie
iTrader: (21)
 
Joined: Sep 2003
Posts: 60
Likes: 0
From: CA
thanks for help,

hey thanks a lot but i have one more question did you think what is the stock psi and i can go to how many psi is safe and don't brow out the engine
Reply
Old Sep 29, 2003 | 07:58 PM
  #5  
Jinu0808's Avatar
Evolving Member
iTrader: (1)
 
Joined: Jul 2003
Posts: 196
Likes: 0
Run it with 19 20 MAX only with 93 octane though and this should be safe enough.
Reply
Old Sep 29, 2003 | 11:14 PM
  #6  
boostedwrx's Avatar
Evolved Member
iTrader: (27)
 
Joined: Dec 2002
Posts: 5,034
Likes: 2
From: Seattle, WA
Turn your gain up to around 20. I have turbo back with no cat and the Xede (94 octane map) and still get no spike with my gain at 25.

Turbo spools nice and quick.

Gain of 25 and set at 65 for some nice 21psi! Feels real good when I mix in 3 gallons 101 go 6 gallons 92. Gives me something like 96 octane. Car feels like its going to take off.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
soldave
Evo General
2
Feb 8, 2013 03:26 AM
Ultimate CC
For Sale/WTB - Engine / Drivetrain / Power
18
Mar 1, 2007 06:28 PM
RichJ
Evo Engine / Turbo / Drivetrain
3
May 17, 2004 03:47 AM
evodemon
Evo Engine / Turbo / Drivetrain
6
Sep 21, 2003 12:47 PM
1QWKEVO
Evo Engine / Turbo / Drivetrain
7
May 26, 2003 07:18 PM




All times are GMT -7. The time now is 05:36 AM.