Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

help

Thread Tools
 
Search this Thread
 
Old Jul 26, 2009 | 11:06 AM
  #1  
jdmsego's Avatar
Thread Starter
Newbie
iTrader: (14)
 
Joined: Aug 2008
Posts: 76
Likes: 0
From: north carolina
help

i just got a new tune after my new turbo set up and made 360 pump gas at 24psi on an mustang dyno. but now when get up near 5000 or 5500 rpms i feel a cut back almost like a misfire but its not that, i was wonderin if this could cause im runnin the stock injectors cause my tuner told to get bigger ones and i could make more power
Reply
Old Jul 26, 2009 | 11:57 AM
  #2  
Evo8Emperor's Avatar
Evolved Member
iTrader: (12)
 
Joined: Oct 2007
Posts: 1,317
Likes: 1
From: Rhode Island
Do you have the knock cel enable through tephra mods ? I would say its knocking. It might not be knock but the knock sensor could be picking up noise under the hood.
Reply
Old Jul 26, 2009 | 12:00 PM
  #3  
FedEvo8's Avatar
Evolving Member
15 Year Member
 
Joined: May 2007
Posts: 345
Likes: 0
From: San Lorenzo
Is your ECU pulling a code? You might want to pull your plugs and inspect, also regap to 0.22...
Reply
Old Jul 26, 2009 | 12:32 PM
  #4  
evolved0414's Avatar
Newbie
iTrader: (5)
 
Joined: Apr 2008
Posts: 92
Likes: 0
From: Maryland
Yea, I had the same problem before...
It ended up being the plugs. And I agree with fedevo, gap them to .22
Reply
Old Jul 26, 2009 | 02:15 PM
  #5  
1d10t's Avatar
Evolved Member
iTrader: (19)
 
Joined: Dec 2007
Posts: 1,001
Likes: 1
From: was Georgia, now williamsport PA
gap to .024"
.22 is almost 1/4"
Reply
Old Jul 27, 2009 | 03:02 PM
  #6  
jdmsego's Avatar
Thread Starter
Newbie
iTrader: (14)
 
Joined: Aug 2008
Posts: 76
Likes: 0
From: north carolina
ok guys ill try that thanks for the help
Reply




All times are GMT -7. The time now is 06:59 AM.