I've been buying parts for maybe 3 weeks I have all the parts sitting in the garage except for the JE pistons. Finally the Je pistons 10:1 compression arrived today that means I can take the car to the shop and get started wish me luck below is a rundown of my build !!!! Parts that are not shown in the pic below is because they are already installed in the car

2.0L JE pistons (10:1 compression ) & Manley turbo "tuff" rods
Forced Performance HTA3586 turbo kit
BC spring and retainers
BC 272/272 cams
Exedy twin disc
Full blown with 2 walbros -8 feed lines & -6 return lines
Perrin fuel Rail & Automotive FPR
BR Uicp & Licp
BR mini battery kit
BR ported Intake Manifold
BR 65mm throttle body
BR 4" intercooler
ralliart thermostat
MIshimoto mini radiator kit
Hks Dli 2
Stock ecu running speed density & Omni 4 bar map sensor

 

good luck with the build. something break or you just decided to go go it?
take some pics... im updating mine tomorrow.

 

going E85?

 

nothing broke I just decided to make a little more power and be safer currently the car made 570@32 psi on e85 but since I've receive all parts the car will be in the shop and hopefully send the block to the machine shop asap my goal is to make anywhere between 650 -700

 

I made the switch to e85 7 monthS ago , best mod I've done so far

 

nice parts, glwb

 

thanks

 

must be nice.. bet your going to have alot more fun now.. wish I had E85 close to me