How much power can i run on buschur dual fuel pumps before running out of fuel? I keep hearing that they will not make it into 800s, that i would need to get bigger pump.

 

1 255 wal. pump can handle 500hp. the dual should be good 900-950hp

 

I dont know about BR double pumper , but my buddy made 856whp with a Full blown with -8 feed and -6 return lines, 1600cc injectors, automotive -10 FPR . AMS fuel Rail, remember E-85 need more volume than pressure

 

well i dont know if i could up grade the fuel lines to -8 and -6 because because all the connections are for stock fuel lines. I wanted to know if anybody ran this kit with e85 into 800s with any problems?

 

talk to mike @awd i believe he made 900 + on the 6765 on e85 and the br double pumper

 

Mellon is into the 700 range with his double pumper and e-85(similar power to your setup)..... You might want to PM him and see whether he is running out of fuel.

 

No he didn't.

OP: Are you running E-85 or race fuel?

 

https://www.evolutionm.net/forums/aw...-t3-turbo.html

 

I run e85 and so far so good, but im not sure how much fuel i had left at 771 i might have to ask my tuner. I know mike uses external pump

 

my mistake

 

Also curious. Maybe upgrade to his twin modified HO pumps, if he still makes them.

 

right now I have the twin buschur walbro HO setup, stock fpr, buschur fuel rail and I'm experimenting with 1650cc injectors... DLL said 675awhp a DynoJet said 705awhp and my IDC is 90% on e85. 800+ might be a problem.

 

do you have the Buschur Racing Dual Fuel Feed Line Kit upgraded? i wonder how much more that helps

 

stock fuel lines

 

no. mikes running a awd fuel kit.

fuel surge tank.....fpr...weldon 2035...stanless steel lines....