Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

greddy ti or ets 3.5 inch exaust system

Thread Tools
 
Search this Thread
 
Old Oct 8, 2009 | 11:46 PM
  #1  
haseeb's Avatar
Thread Starter
Evolving Member
iTrader: (2)
 
Joined: Jul 2007
Posts: 421
Likes: 0
From: pakistan
greddy ti or ets 3.5 inch exaust system

as the title says ,what do u guyz think i shud go for ?
i think the greddy evo2 exaust system which im currently using is very much ristricted for my setup,so im in a plan to change it and these r the 2 options i have rite now to get ...
my mods r in my signature ..
thanx

Last edited by haseeb; Oct 9, 2009 at 10:02 PM.
Reply
Old Oct 8, 2009 | 11:48 PM
  #2  
tim85851's Avatar
Evolved Member
iTrader: (23)
 
Joined: Mar 2007
Posts: 1,515
Likes: 1
From: Madison, WI
get the goliath!!! (ets)
Reply
Old Oct 9, 2009 | 01:31 AM
  #3  
haseeb's Avatar
Thread Starter
Evolving Member
iTrader: (2)
 
Joined: Jul 2007
Posts: 421
Likes: 0
From: pakistan
thanx
ny 1 else ?
Reply
Old Oct 9, 2009 | 01:39 AM
  #4  
antonio010's Avatar
Evolving Member
iTrader: (24)
 
Joined: Dec 2004
Posts: 472
Likes: 3
From: Chandler, AZ
The greddy ti exhaust weighs 9lbs, plus its 80mm (3.15")
So if weight is a factor, it's definitely the exhaust to consider, it's also the one I'm running at my power level. Though, it's probably the loudest exhaust I've ever heard.

Either one you go with, you can't lose.
Reply
Old Oct 9, 2009 | 02:48 AM
  #5  
haseeb's Avatar
Thread Starter
Evolving Member
iTrader: (2)
 
Joined: Jul 2007
Posts: 421
Likes: 0
From: pakistan
im talking about the ti not the full titanium 1 .
thanx
Reply
Old Oct 9, 2009 | 04:04 AM
  #6  
damie45's Avatar
Evolving Member
iTrader: (5)
 
Joined: Apr 2007
Posts: 187
Likes: 0
From: Illinois
U prolly meant the TI-C then.
Reply
Old Oct 9, 2009 | 06:09 AM
  #7  
SmurfZilla's Avatar
Evolved Member
iTrader: (33)
 
Joined: Jul 2002
Posts: 5,313
Likes: 1
From: Raleigh, Transplanted from Toronto, Canada
Ti-C is loud but not obnoxious to me (Try a buddy club). 80mm from Turbo back.....good cost, Ti look. Can't go wrong...and yes I have one. LOL
Reply
Old Oct 9, 2009 | 06:23 AM
  #8  
buchnerj's Avatar
Evolved Member
iTrader: (19)
 
Joined: Jul 2007
Posts: 1,497
Likes: 2
From: the burgh, pa
I have the greddy Ti-C on a catless setup that takes 3 all the way from the turbo and it is pretty loud. I never realized it had a silencer built in until I took it to the dyno to get tuned. With the silencer in it was very reasonable, not much louder than the stock (maybe like 20% louder) but with it out it is pushing the limits of my taste. I might put the silencer back in or start shopping for a new one. It is to the point where even if I have my radio on with all the windows up I can still hear it grumbling. Good news is when you have cams it sounds like an old souped up muscle car grumbling, bad news is, if your going WOT near any cop, he is going to know something is up. Lets just say, its is for sure not California friendly.
Reply
Old Oct 9, 2009 | 06:24 AM
  #9  
hokiruu's Avatar
Evolved Member
iTrader: (19)
 
Joined: Apr 2006
Posts: 2,004
Likes: 2
From: Truckee, CA
I love ETS, but unless you're sure you're going to be trying to make 600+ whp, the 3.5" isn't NEEDED, although it won't hurt anything either. Look at the exhaust weights and price, that would decide for me.
Reply
Old Oct 9, 2009 | 06:33 AM
  #10  
ssg_petty_210's Avatar
Evolved Member
iTrader: (13)
 
Joined: Feb 2009
Posts: 1,187
Likes: 1
From: Texas
id say go with the ets. i know the ets is loud, but so is the greddy. I personally have the buscher tbe system on my car, and its is pretty dang loud. i like the greddy tic exhaust.
Reply
Old Oct 9, 2009 | 10:07 AM
  #11  
ETS Michael's Avatar
Former Sponsor
iTrader: (91)
 
Joined: Mar 2007
Posts: 8,685
Likes: 54
From: Vancouver, WA
I would go with the ETS Exhaust system If you have any questions regarding the exhaust, let me know!

Thanks,

Michael
Reply
Old Oct 9, 2009 | 10:14 AM
  #12  
Spoolin' By U's Avatar
Newbie
 
Joined: Aug 2009
Posts: 68
Likes: 0
From: New Jersey
ETS TBE 3.5" here!
Reply
Old Oct 9, 2009 | 11:22 AM
  #13  
haseeb's Avatar
Thread Starter
Evolving Member
iTrader: (2)
 
Joined: Jul 2007
Posts: 421
Likes: 0
From: pakistan
U can see my mods and they r well gud for 600 whp ,so I'm going with ets for sure
Thanx
Reply
Old Oct 9, 2009 | 12:41 PM
  #14  
dsm25psi's Avatar
Evolved Member
iTrader: (44)
 
Joined: Jun 2007
Posts: 914
Likes: 0
From: Charlotte,NC
i got ets 3.5 and i love it, ETS ftw
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
evolution13
Evo X General
5
May 23, 2015 03:16 PM
evolution13
Evo X Engine / Turbo / Drivetrain
5
Apr 14, 2015 05:37 PM
RomanWolf
Lancer How To Requests / Questions / Tips
3
Sep 17, 2012 12:36 PM
SeanM505
Evo Engine / Turbo / Drivetrain
3
Jul 5, 2011 11:18 PM
areet
Evo Engine / Turbo / Drivetrain
9
Nov 6, 2004 10:30 AM




All times are GMT -7. The time now is 05:04 PM.