My service engine soon light is always coming on due to my test pipe. I know its not hurting anything but i just hate seeing it on so i clear it away and then it will come back on shortly after. Is there anything i can do to keep it from coming on? Or is this somthing im just gonna have to live with?

 

o2 sim or spark plug anti-fouler will work.

 

Go pick up an o2 non-fouler from an autoparts place. You will need to drill out the center with a 1/2" bit for the o2 sensor to fit. Screw that into your TP, then the o2 sensor into that and you won't get a SES again. If you do, repeat the process with another, screw both non-fouler's together then insert the o2 sensor. Should fix it.

Good directions here... http://www.energeticforum.com/renewa...n-foulers.html

 

Please do a search, there are plenty of how-to's on this across the forums here. You should be able to find what your looking for very easily.

 

get two spark flug anti-foulers and screw them in together, screw one end into your o2 bung, the other into the o2 sensor. Been working for me for 2 years.

 

^ haha, all good advice... in the span of .01 seconds.

 

+1^ Gotta love how quick you can get responses on this site, always nice to have this at your disposal

 

Just flash a Tephra ROM onto your ECU since it has a rear o2 sim built into it.

 

easiest way is to tune/flash it out like Kraka said.

 

How do I tune/flash it out? can i do this myself?