Well i was having a good day won a good race with my friend's stage 3 w/ xtra mods in his s4....

Went to Atco Raceway....
well on my 1st pass... i shift to 4th and my clutch would not go back up so i let off in the mid of 4th maybe closer to 5-6k rpm....i got pissed and threw my helmet at my windshield.....
when i went to get my timeslip i got pissed and threw my helmet against my windshield again... i ran 12.1@113 with more rpms left in 4th... i was pissed.. im soo damn sure i would have ran 12.0 and maybe 11.9.... ****ing ****.. i cant believe my brand new SECOND Exedy Twin Plate broke......i just have no luck

 

Im tellin ya gerard.....something originally got messed up when you had the first exedy put in.

This second time around, the problem wasnt fixed, and thats why you are back in the same position again. Hopefully the shop its @ now will get it right, and make sure that this stupid problem happens again.

Ken

 

hey ken whats up... how does it fell to have one of the fastest stock evo with ONLY the DynoFlash???

 

it feels pretty damn good!

 

Kenny, is that you? white EVO? Yonkers?

 

geez dood sorry to hear that

 

BY the way Rollaway, sorry to hear about the clutch. I would've done the job for you but you chose no to. If the clip on the pressure plate is set wrong the clip breaks and the clutch is no longer. It takes either luck or a good tech to do the job right. I have a HKS clutch and I must say that there design is leagues away from a stock/exedy setup. The quality in design for the HKS is just superb and the pedal is lighter than stock, not grabby like the EXEDY either. Good luck!

 

That does blow, but I think I take you on the bad luck thing.

 

the hks clutch is the bomb.I have the HKS GD max twin disc system and it works reall good.

 

HKS or Ogura are they way to go

 

damn just dynoflash and you are running 12's? thats awesome

 

Sorry to hear about it man; those of us who test these cars are going to keep breaking things. Pay no attention to the brand loyalists, the Exedy is a kick-*** unit - but it does take a competent person to install properly.

At least your MPH is consistent

 

what mods are you running?

nice time, bad luck

hopefully everything gets worked out

 

Rollaway - very sorry to hear that bad news man - didn't you have a brand new Exeddy unit ?

I am starting to think the Exeddy has a design flaw!

BTW - tell me all about the Dyno Flash guy going 12.6 !!!!!!!!!!!!

 

I would write or call Exeddy! Seems like a problem. maybe they will replace it, hopefully. They need to check in to that problem. Good luck sorry to hear that. Nice time thou!