I put on this very nice set and well packaged coil setup on my car the other day. Makes the car run great, changed my a/f ratio like crazy from idle 2 wide open seems to burn fuel properly very pleased with the product. I had a question, has anyone experienced having to change the dwell time on the aem for these or running an aem and having coil drivers burn up. I am not saying these coils are the problem on why me drivers burnt up I thiink they where on there way out anyways is maybe why i was having my high rev. ignition break up.

I guess what my question is:
1 has anyone expericened burnt up coil drivers and why
2 what are the factory or what these coils dwell times are?


*Spoolin up coils are great and a well packaged product and the service is great!

 

Go look in the AEM forum first off... and you'll find the answer in the coil dwell topic!!!

 

I haven't experienced any problems running these coils with the AEM.

 

just checked all 10 pages of aem forum evo section and looking on here also to fine dwell times atleast factory ones. Hopefully im not over looking it.

 

https://www.evolutionm.net/forums/ec...ecu-again.html

Here is a better thread to go through. That should get you going Im pretty sure.

The base map coil dwell setting suck unless they have updated them.

 

There is a setting in AEM for Denso/Toyota/Prius coils. Haven't seen AEM in some time but that's what you want.

 

Checked out the coil wizard all i say was:
Mitsu evo 8
toyota 3.0L non turbo
toyota supra ect

Nothing denso specific, which toyota do you guys run or do u just turn it to mitsu evo 8

 

i just left my settings as they were on the stock coils.....i love the cop from spoolin up.....and his customer service is beyond what many people extend now days. i had a coil go out and he promptly sent me a replacement. i bought the used parts one form him btw!

chad

 

Just check my personal laptop when i installed the newest aem pro and it does have the settings for a toyota tc/xa/xb/pruis/echo coil the shop laptop must have very old software when i checked it cause it didnt have it.

 

Why this and not improved stock settings?

These settings seem a bit weak...

 

Hi Guys,
do anyone knows whether this AEM High Output IGBT Inductive "Smart" Coil plug and play to Evo 5?
http://www.aemelectronics.com/high-o...mart-coil-1240

 

Is the TC/Prius/Echo the correct dwell settings in EMS?