i have a invidia 02 housing & perrin downpipe but im looking for something with a true 3" flow..

what do you guys think of the MAP integrated 3" 02,downpipe with the wastegate gasses split from the 02 then recirculate a few inches down while retaining a 3" flow

what else do you guys recommend? or should i just keep what i got?

 

what are u palns in the future for a turbo ?? if u buy the MAP integrated 3" 02,downpipe with the wastegate , u wont go wrong , ull be fine , its an exellent part , and it will give u that room to grow in the future in case u want to go with a FP BLACK or FP RED

 

well i already have an fp-red sitting in my room with some other mods and i also am getting my motor built from buschur in a little bit.

also i wasnt going to get the wastegate on it..

my question is: how much gains could i see if i switch from my invidia 02 & perrin downpipe to the MAP recirculated 3" 02/downpipe?

is it worth it?

 

MAP or Shearer Fab.

these two are the only true 3" ones to my knowledge! Good stuff maynard

 

does anyone have the new MAP 3" 02/downpipe w/o the wastegate?

would really like a little info on this cause i dont know if its worth selling my 02/downpipe for the MAP one?

worth it or not worth it?

 

I have been running the MAP downpipe/02 dump for about 6 months it is a really nice piece, fit perfect and comes with gasket and hardware. I dont have any #s or anything but I did need to make a few simple adjustments to fuel, as I was hitting fuel cut. The only mods on the car other than the downpipe was ets dp back exhaust and ets intake if that helps.

 

^^ is this what you have- http://www.maperformance.com/map-sta...s-mvs-evo.html ?