EvolutionM - Mitsubishi Lancer and Lancer Evolution Community

Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

highest amount of power made on stock intercooler?

Thread Tools
 
Search this Thread
 
Old Apr 17, 2010 | 08:35 AM
Share
  #1  
mattz09's Avatar
mattz09
Thread Starter
Newbie
iTrader: (3)
 
Joined: Dec 2009
Posts: 88
Likes: 0
From: maryland
highest amount of power made on stock intercooler?
anyone making around 450 awhp on stock intercooler or possible even more power?
Reply
0
Old Apr 17, 2010 | 09:05 AM
Share
  #2  
Kracka's Avatar
Kracka
Evolved Member
iTrader: (49)
 
Joined: Apr 2007
Posts: 8,970
Likes: 17
From: Prosper, TX
I saw 410whp on a Dyno Dynamics with an Evo VIII on stock FMIC. It had some huge turbo and didn't spool until after 5k RPM; overall a very lackluster setup.
Reply
0
Old Apr 17, 2010 | 10:42 AM
Share
  #3  
sphinxof2006's Avatar
sphinxof2006
Evolving Member
iTrader: (4)
 
Joined: Nov 2005
Posts: 226
Likes: 1
From: Bay Area
It's just kinda a waste i mean while throw on hella mods and heatsink it with stock ic
Reply
0
Old Apr 17, 2010 | 11:27 AM
Share
  #4  
High_PSI's Avatar
High_PSI
Evolved Member
15 Year Member
Liked
Loved
Community Favorite
iTrader: (50)
 
Joined: Apr 2006
Posts: 4,152
Likes: 17
It'll make POWER but not consistently. The Stock Turbo loses 2+PSI and heats up considerably. An AMS Unit losses less then 1 PSI and doesn't heat up that much at all.
Reply
0
Old Apr 17, 2010 | 11:43 AM
Share
  #5  
mattz09's Avatar
mattz09
Thread Starter
Newbie
iTrader: (3)
 
Joined: Dec 2009
Posts: 88
Likes: 0
From: maryland
so no one is making any kinda big numbers on stock intercooler?
Reply
0
Old Apr 17, 2010 | 12:22 PM
Share
  #6  
High_PSI's Avatar
High_PSI
Evolved Member
15 Year Member
Liked
Loved
Community Favorite
iTrader: (50)
 
Joined: Apr 2006
Posts: 4,152
Likes: 17
Originally Posted by mattz09
so no one is making any kinda big numbers on stock intercooler?
No Cheapo, spend the money and get one. It PREVENTS you from lossing HP. The STOCK UNIT heats up and then your car pulls timing. Get an AMS Unit or a Buschur unit, both use Garrett cores and work perfectly.
Reply
0
Old Apr 17, 2010 | 12:28 PM
Share
  #7  
mattz09's Avatar
mattz09
Thread Starter
Newbie
iTrader: (3)
 
Joined: Dec 2009
Posts: 88
Likes: 0
From: maryland
Originally Posted by High_PSI
No Cheapo, spend the money and get one. It PREVENTS you from lossing HP. The STOCK UNIT heats up and then your car pulls timing. Get an AMS Unit or a Buschur unit, both use Garrett cores and work perfectly.

i am trying to get one i want ets or ams but i cant seem to find one around here
Reply
0

Trending Topics

Old Apr 17, 2010 | 01:50 PM
Share
  #8  
Kracka's Avatar
Kracka
Evolved Member
iTrader: (49)
 
Joined: Apr 2007
Posts: 8,970
Likes: 17
From: Prosper, TX
I'm sure ETS and AMS both have them in stock. ETS especially always seems to keep an abundant supply sitting on the shelves and their's start under $500.
Reply
0
Old Apr 17, 2010 | 02:12 PM
Share
  #9  
merlin00069's Avatar
merlin00069
Evolved Member
iTrader: (3)
 
Joined: Oct 2008
Posts: 545
Likes: 0
From: Miami
Originally Posted by High_PSI
It'll make POWER but not consistently. The Stock Turbo loses 2+PSI and heats up considerably. An AMS Unit losses less then 1 PSI and doesn't heat up that much at all.
Agreed. The stock IC will make power...but it's not as efficient as an upgraded IC. It's always a good idea to upgrade the IC to avoid heat soak, run efficiently and to maximize potential later.
Reply
0
Old Apr 17, 2010 | 02:36 PM
Share
  #10  
BillSpec's Avatar
BillSpec
Evolving Member
 
Joined: Mar 2010
Posts: 323
Likes: 0
From: Behind a laptop in FLA
Made 460 on an 8 2yrs ago before swapping it out and picking up 15 wheel
Reply
0
Old Apr 17, 2010 | 03:17 PM
Share
  #11  
mattz09's Avatar
mattz09
Thread Starter
Newbie
iTrader: (3)
 
Joined: Dec 2009
Posts: 88
Likes: 0
From: maryland
Originally Posted by B-Spec
Made 460 on an 8 2yrs ago before swapping it out and picking up 15 wheel

how long did you run that on stock ic
Reply
0
Old Apr 17, 2010 | 05:13 PM
Share
  #12  
High_PSI's Avatar
High_PSI
Evolved Member
15 Year Member
Liked
Loved
Community Favorite
iTrader: (50)
 
Joined: Apr 2006
Posts: 4,152
Likes: 17
Originally Posted by mattz09
how long did you run that on stock ic

That is 460 on one dyno pull, it'll heat soak and loose power. The answer doesn't change, you pick up WHP on a stock FMIC especially at the top of 3rd GEAR where the OEM unit heats up.
Reply
0
Old Apr 17, 2010 | 05:46 PM
Share
  #13  
xRoguex's Avatar
xRoguex
Evolved Member
iTrader: (15)
 
Joined: Apr 2009
Posts: 1,666
Likes: 12
From: Pittsburgh, PA
CBRD's no cut 3.8" garrett core is nice.
Reply
0
Old Apr 17, 2010 | 06:05 PM
Share
  #14  
McLaren F1 2003's Avatar
McLaren F1 2003
Evolved Member
iTrader: (8)
 
Joined: Oct 2006
Posts: 678
Likes: 1
From: Las Vegas
Originally Posted by xRoguex
CBRD's no cut 3.8" garrett core is nice.
this!

its what i plan on doing
Reply
0
Old Apr 17, 2010 | 06:05 PM
Share
  #15  
sparky's Avatar
sparky
Evolved Member
iTrader: (1)
 
Joined: Mar 2005
Posts: 7,905
Likes: 5
From: Mesoamerica/ SF Bay Area
Originally Posted by xRoguex
CBRD's no cut 3.8" garrett core is nice.
What exactly does "no cut" refer to with respect to intercooler cores, Rogue? Just curious as I'd never seen this particular terminology before. Thanks.
Reply
0



Advanced Search

All times are GMT -7. The time now is 10:26 PM.