10.88 stock engine, stock turbo mod list
10.88 stock engine, stock turbo mod list
I'm so happy with this car that I just wanna keep spreading the news.
Purchased the car in November from Ebay, a gentleman name Mark from Michigan had bought it from California 3 months prior to that. It had 36k on it when he bought it and I got it from him with 38600 miles. Almost completely stock, it had an AEM intake and no name downpipe.
Current power mods
AEM Intake, BR intercooler pipes, BR intercooler,EPM O2 housing, BR TBE, MBC, E85, Tuning
Other mods
BR front cross member, BR mustache bar, BR rear Diff brackets, JDM rear bumper, Hoosiers drag tires, JDM MR headlights, BBS SE wheels, radio delete(came with a radio when I got it)
Future mods
rotors, driveshaft, actuator, Evo8 4th gear,sparco seats or something light.
Supporting mods
Precision 1000cc injectors, Walbro 255lph fuel pump, Exedy twin HD clutch,
Engine management
Factory ecu, factory maf, 8700 rev limit
Stock parts
The rest that are not mentioned are all stock
Last but not least mod
Pedal to steering wheel interface------ME haha.
Dynograph
Fresh tires
Time slip
Video runs
Purchased the car in November from Ebay, a gentleman name Mark from Michigan had bought it from California 3 months prior to that. It had 36k on it when he bought it and I got it from him with 38600 miles. Almost completely stock, it had an AEM intake and no name downpipe.
Current power mods
AEM Intake, BR intercooler pipes, BR intercooler,EPM O2 housing, BR TBE, MBC, E85, Tuning
Other mods
BR front cross member, BR mustache bar, BR rear Diff brackets, JDM rear bumper, Hoosiers drag tires, JDM MR headlights, BBS SE wheels, radio delete(came with a radio when I got it)
Future mods
rotors, driveshaft, actuator, Evo8 4th gear,sparco seats or something light.
Supporting mods
Precision 1000cc injectors, Walbro 255lph fuel pump, Exedy twin HD clutch,
Engine management
Factory ecu, factory maf, 8700 rev limit
Stock parts
The rest that are not mentioned are all stock
Last but not least mod
Pedal to steering wheel interface------ME haha.
Dynograph
Fresh tires
Time slip
Video runs
Trending Topics
Boost is posted on the graph. A little hard to read but its there. Reference is on the right side.
8700 rpm limit. I have yet to tap the rev limit so the engine has not seen 8700. I raised it up after my very first run with the stock limiter set at 7600. I had to shift to 5th gear before the end of the track.
Another local guy here is revving his stock valve springs past 9k with his 6speed gear box. He stays in 4th and traps 126-7. I plan on doing the same if I get any more power.
8700 rpm limit. I have yet to tap the rev limit so the engine has not seen 8700. I raised it up after my very first run with the stock limiter set at 7600. I had to shift to 5th gear before the end of the track.
Another local guy here is revving his stock valve springs past 9k with his 6speed gear box. He stays in 4th and traps 126-7. I plan on doing the same if I get any more power.
you can rev the stock motor to 8700 rpms with the stock balance shafts? all you need is valve springs im guessing?
I have cosworth m2 cams with stock springs, can i rev it out that high?
I have cosworth m2 cams with stock springs, can i rev it out that high?
Last edited by evoforlife; May 3, 2010 at 02:20 PM.
