Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

B&B Downpipe-HELP!!! Rubbing

Thread Tools
 
Search this Thread
 
Old Nov 14, 2003 | 06:07 PM
  #1  
scorke's Avatar
Thread Starter
Evolved Member
iTrader: (18)
 
Joined: May 2003
Posts: 5,192
Likes: 0
From: Nj
B&B Downpipe-HELP!!! Rubbing

Hey there guys, I installed the BB triflo downpipe and catback today and have some questions, I seem to be getting some very strange smells and what not, but I think that is normal. What worries me is under high boost and at what seems to be at random times the downpipe seems to rattle against the lower part of the frame about 7 inched before the cat. I was wondering if anybody else is having this problem. Also how much of a difference in spooling noise do you get when you get up to about 5k rpm?

Thanks for your help

Scorke
Reply
Old Nov 14, 2003 | 07:07 PM
  #2  
amigoni's Avatar
Evolving Member
 
Joined: Feb 2003
Posts: 218
Likes: 0
From: Denver CO
I don't get any rattling, but boy it smelled the first week or so. Still smells a little.
Reply
Old Nov 14, 2003 | 08:08 PM
  #3  
mojo's Avatar
Evolving Member
iTrader: (4)
 
Joined: Apr 2003
Posts: 329
Likes: 0
From: Las Vegas
No rattle here either.
Reply
Old Nov 14, 2003 | 08:10 PM
  #4  
scorke's Avatar
Thread Starter
Evolved Member
iTrader: (18)
 
Joined: May 2003
Posts: 5,192
Likes: 0
From: Nj
really

When you guys installed, of the section of the downpipe about half a foot infront of the cat how close to the frame was it? I think when my engine really starts to twist it starts to rattle. And how much noiser did the downpipe make ur turbo sound?

Scorke
Reply
Old Nov 14, 2003 | 08:57 PM
  #5  
bishiboy's Avatar
Evolved Member
iTrader: (10)
 
Joined: Jan 2003
Posts: 942
Likes: 0
From: Yuma AZ
No rattle or smell with mine. Is it really close to the frame cross braces? Put a couple flat washers under them to give a little room.
Reply
Old Nov 15, 2003 | 06:13 AM
  #6  
scorke's Avatar
Thread Starter
Evolved Member
iTrader: (18)
 
Joined: May 2003
Posts: 5,192
Likes: 0
From: Nj
washers?

A little flat washers under where?

scorke
Reply
Old Nov 19, 2003 | 08:45 PM
  #7  
Jev3gs's Avatar
Evolving Member
 
Joined: Sep 2003
Posts: 148
Likes: 0
From: Chicago Burbs
I think he is talking about the 2 tie bars underneath the downpipe. I just finished installing mine so I don't know if it will rub yet. I have washers though so I am prepared
Reply
Old Nov 20, 2003 | 01:07 PM
  #8  
scorke's Avatar
Thread Starter
Evolved Member
iTrader: (18)
 
Joined: May 2003
Posts: 5,192
Likes: 0
From: Nj
Ahhhh thats where you were talking about. When installing the downpipe on my car I looked to see if it could rub anywhere and it looked like it was most likely to rub on the top side of the downpipe on the lower subframe of the car, not those bars.

Scorke

p.s. We are getting another evo and considering going with a different downpipe if this one does rattle, what do you guys think? Im asking the BandB crowd so they can compare.
Reply
Old Nov 20, 2003 | 01:10 PM
  #9  
amigoni's Avatar
Evolving Member
 
Joined: Feb 2003
Posts: 218
Likes: 0
From: Denver CO
Guys I Installed it and the pipe does not rub anywhere.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
scorke
Evo Engine / Turbo / Drivetrain
16
Sep 12, 2007 08:46 PM
scorke
Evo Engine / Turbo / Drivetrain
4
Jul 6, 2007 12:11 PM
scorke
Evo Engine / Turbo / Drivetrain
19
Apr 6, 2007 08:48 AM
scorke
ECU Flash
5
Mar 14, 2007 07:22 AM
SmokinJoe
Evo Engine / Turbo / Drivetrain
191
Nov 26, 2006 07:43 PM




All times are GMT -7. The time now is 09:33 AM.