Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

front oxygen sensor location vii

Thread Tools
 
Search this Thread
 
Old Jul 31, 2010 | 05:06 AM
  #1  
rnbguy's Avatar
Thread Starter
Newbie
 
Joined: Jul 2010
Posts: 61
Likes: 0
From: australia
front oxygen sensor location vii

guys, im struggling to find a simple picture of the oxygen sensor location on a evo vii and if it's possible to remove from the top of the car?

i checked stickies.
Reply
Old Jul 31, 2010 | 08:30 PM
  #2  
jba3's Avatar
Evolving Member
iTrader: (7)
 
Joined: Sep 2006
Posts: 146
Likes: 0
From: Northern VA
if its the same place as the 8s, stand in front of the car, look on the left side of the o2 housing, down near the downpipe flange, and it's right there. i can get mine in/out from the top of the car, but most of my stuff around it isn't stock....
Reply
Old Aug 1, 2010 | 03:59 AM
  #3  
rnbguy's Avatar
Thread Starter
Newbie
 
Joined: Jul 2010
Posts: 61
Likes: 0
From: australia
Thank you I found it going to get a oxygen sensor socket and see how I go , I'm worried because it's on a funny angle
Reply
Old Aug 1, 2010 | 06:20 AM
  #4  
bbyevo8u's Avatar
Evolved Member
iTrader: (14)
 
Joined: Jun 2005
Posts: 2,581
Likes: 2
From: NY
the car has two 02 sensors?
Reply
Old Aug 1, 2010 | 06:54 AM
  #5  
SwishaSweet's Avatar
Evolving Member
iTrader: (10)
 
Joined: May 2010
Posts: 273
Likes: 0
From: Wisconsin
yes it has 2 oxy sensors. The front one is on the O2housing and should be replaced at 60K im prety sure. When I removed mine i just cut the wires then used a socket to get it off. Its much easy to get a new one in then it is to take the old one out.
Reply
Old Aug 1, 2010 | 07:22 AM
  #6  
bbyevo8u's Avatar
Evolved Member
iTrader: (14)
 
Joined: Jun 2005
Posts: 2,581
Likes: 2
From: NY
hmm i have my wideband in my 02 housing and my 02 sensor in my test pipe?
Reply
Old Aug 1, 2010 | 07:36 AM
  #7  
jba3's Avatar
Evolving Member
iTrader: (7)
 
Joined: Sep 2006
Posts: 146
Likes: 0
From: Northern VA
Originally Posted by bbyevo8u
hmm i have my wideband in my 02 housing and my 02 sensor in my test pipe?
Wideband should be that close to the turbo, I think 8" away minimum is the recommended distance. Most people put it at the rear of their downpipe, before the cat.
Reply




All times are GMT -7. The time now is 06:34 AM.