Comparison thread for HTA 3586 w/.63 ar and HTA 3586 w/.82 ar
Thread Starter
Account Disabled
iTrader: (46)
Joined: Jun 2010
Posts: 397
Likes: 1
From: Fayetteville, NC
Comparison thread for HTA 3586 w/.63 ar and HTA 3586 w/.82 ar
We had a customer that had just been mildly tuned with a 3586 w/.63 ar on 93 pumpgas. Wanted to start a thread so that forum members could post their mod list and dyno graphs(dj, md, dd or VD/VDR) for discussion/comparison purposes. Here is the link to his thread: https://www.evolutionm.net/forums/ev...93-octane.html
Thanks in advance!
Thanks in advance!
6262 63 .ar 93 oct pump gas.
gsc 2 cams with springs and retainers
all supporting mods (stock i/m and tbody)
This graph was 29 psi I made 550 whp at 30.5 this was stock ignition.I have a cop now.
Its a 6spd all were 3rd gear pulls 4th would have made more power and spool faster too.
https://www.evolutionm.net/forums/at...028_232024.jpg
gsc 2 cams with springs and retainers
all supporting mods (stock i/m and tbody)
This graph was 29 psi I made 550 whp at 30.5 this was stock ignition.I have a cop now.
Its a 6spd all were 3rd gear pulls 4th would have made more power and spool faster too.
https://www.evolutionm.net/forums/at...028_232024.jpg
Last edited by EVO IXMR; Nov 24, 2010 at 08:52 PM.
Thread Starter
Account Disabled
iTrader: (46)
Joined: Jun 2010
Posts: 397
Likes: 1
From: Fayetteville, NC
Can you specify supporting mods. I'd like to know what size injectors you had just for reference and do you have a double pumper? Looks pretty nice though.......
Trending Topics
Car put down 441whp & 356 wtrq @ 27.7 psi on 93 octane on SD. Here is the list of mods:
1)HTA3586 + 0.63 Tial v-band hotside
2)ETS 3.5'' + BR ucip + Tial Q BOV
3)BR 3'' catless catback
4)950 cc FIC + single walboro
5)GSC S2 cams + dual springs
6)Spartech non-cdi
Stock motor (48k miles) except for the cams and springs, and stock intake manifold and throttle body!

4th gear pull
1)HTA3586 + 0.63 Tial v-band hotside
2)ETS 3.5'' + BR ucip + Tial Q BOV
3)BR 3'' catless catback
4)950 cc FIC + single walboro
5)GSC S2 cams + dual springs
6)Spartech non-cdi
Stock motor (48k miles) except for the cams and springs, and stock intake manifold and throttle body!

4th gear pull
BR HTA86 turbo kit .82 housing w/ 4in intake
BR upper/lower IC piping
BR COP ignition
BR Race FMIC
BR ported intake mani/65mm TB
BR inline boost controller
BR double pumper fuel system
BR mini battery kit
BR catchcan
buddyclub 272's
PTE 1000cc injectors
BR built tranny
quartermaster twin disk clutch
515/417 stock motor/head/ECU
BR upper/lower IC piping
BR COP ignition
BR Race FMIC
BR ported intake mani/65mm TB
BR inline boost controller
BR double pumper fuel system
BR mini battery kit
BR catchcan
buddyclub 272's
PTE 1000cc injectors
BR built tranny
quartermaster twin disk clutch
515/417 stock motor/head/ECU


