evoiao

iTrader: (10)

Im having a supertech valve kit installed at the same time as head bolts and kelford 272.
So the machanic calls to tell me the the kit came with the wrong valve seats......
He says that I have a 1st Gen castings, which requires a different valve seats.
I have an 06 EVO9.
I went onto a site and this is what I found.....Same 1st Gen castings may need to use a different seat locator SEAT-M1006D due to a taller valve guide boss.
Here is the link to the site,(both he and I...and I hope you are now looking at). http://www.nolimitmotorsport.com/sup...itsubishi.html

Is this true? do I have the wrong seats.....? he said when he put the seats in place there was enough room to fit his finger nail and that he is worried that if he install then the valves may collapse??? any thought out there....I want to do it right the first time....
thanks for any comments.

evoiao

iTrader: (10)

bump

evoiao

iTrader: (10)

ttt

eTiLiKo

iTrader: (1)

If I understand what you're talking about the correct name for this part is VALVE SPRING SEAT LOCATOR.
VALVE SEAT is another thing.

evoiao

iTrader: (10)

SEAT-M1006D Supertech Valve Spring Seat

Quantity in Basket:none
Mfg Part Number:
Code: SUP-SEAT-M1006D

this is what supertech call it....the question boild down to is there different casting 1st gen or 2nd gen and how do I find out which one I need?

evoiao

iTrader: (10)

anyone out there have an answer on this?

evoiao

iTrader: (10)

so the parts I have are
spr-m1007D...........dul springs
seat- m1007d/ff.........seats
ret-m65/tstd.....retainers
vs-h6.6e,,,,,,,seals exhust
vs-h66.6i ........seals intake

but Im being told that i need seat-M1006D????
can anyone advise as to why Id need a different part?
m1007d vs m1006d

thanks

evoiao

iTrader: (10)

anyone know about valve train?

4RETECH

iTrader: (86)

I have only installed this style.

Never installed the ones pictured by you.


http://vr-speed.com/store/valvetrain...71ea5b08156989

evoiao

iTrader: (10)

thanks, anyone else?

evoiao

iTrader: (10)

im being told that there is a gen 1 engine and a gen 2? for the evo9 which is why I need seat-1006m and NOT seat-1007m......ccan anyone confirm this?

BigT

iTrader: (8)

Call supertech.

evoiao

iTrader: (10)

thats what I did and yes there are two generation of 4g63 engines for the evo9 a 1st and a 2nd.