I found the kit for 580's-1000cc and then it skips to 1600's on every site I've seen.

this one:
http://www.extremepsi.com/store/prod...cat=628&page=1

Will this fit on my 1200's? Are they all the same?

here are the ones I have, it looks like I'm missing the lower o rings and lower injector tips?

 

hmm Id say give STM a call since they have the same kit, they have very good customer service and should be able to help you out

 

Hey yeah, I contacted them..they said to give them a call back by the end of the day, I also contacted precision and they said the 1600cc injector ones would work...didn't make sense to me as they are different kinds of injectors. I don't know if it matters but the 1200's are ball and seat nozzle and the 1600's are pintle style

 

I have PTE 780s. Ball style too, I ordered the PTE seals kit when I first bought the car cause the ones then were cracked, now I notice the lower seals are cracked again.

I just ordered the FIC kit off off extremepsi, it's $20. The kit will work with our injectors, and the seals are pretty durable.

In stock and ready to ship!

http://www.extremepsi.com/store/prod...7&cat=0&page=1

 

I saw those too, but it doesn't have the "lower injector tips" or Pintle caps..seen in this, do I really need those? A friend of mine broke one of his and never replaced it..said it was fine?

http://www.extremepsi.com/store/prod...cat=628&page=1

 

Well that kit will work, your injectors are ball style too.


These will work too,

http://injector-rehab.com/shop/Bosch...intle-Cap.html

 

Thanks man

 

I run the FIC oem style seals with my 1200's. I do not use the pintle caps at all. No boost leaks from the injector areas and injectors sit well in the rail and manifold.

 

I don't know if you already ordered a set. I am waiting on a call back from PTE to verify which is the proper kit that they sell to work with the 1200s.

-Brian Gleason
www.stmtuned.com