Installing performance injectors
I cannot wait my evo back to the road 
I have evo4 with evo8 engine and evo8 turbo.
I am planning to improve it's performance with keeping lag as smaller as possible so I will be looking for installing evo9 turbo.
I am willing to get around 400hp.
Currently engine is being rebuilt - forged pistons and so on.
I hope get car till summer. However turbo upgrade is scheduled after summer.
So the questions is - does it make sense to change injectors/fuel rail/pressure regulator now or when I install the newer turbo and we try to get those 400hp?
I am advised to buy Injector dynamics 1000cc injectors. I counted that for 400hp it's ok to have 700cc injectors. If I buy 1000cc will this affect engine in any way? The point is that 1000cc Injector Dynamics is the popular model.
I am planning to improve it's performance with keeping lag as smaller as possible so I will be looking for installing evo9 turbo.
I am willing to get around 400hp.
Currently engine is being rebuilt - forged pistons and so on.
I hope get car till summer. However turbo upgrade is scheduled after summer.
So the questions is - does it make sense to change injectors/fuel rail/pressure regulator now or when I install the newer turbo and we try to get those 400hp?
I am advised to buy Injector dynamics 1000cc injectors. I counted that for 400hp it's ok to have 700cc injectors. If I buy 1000cc will this affect engine in any way? The point is that 1000cc Injector Dynamics is the popular model.
I agree that injectors aren't required, however, if you're going to do them, I'd recommend doing them later, as I find it much better to break in a new motor on stock injectors!
injectors
In the event you are going to change and install injectors .Let us know we have the same injector at a much lower price and include a Resistor box by pass plug FREE to run the high imp . injectors or any fuel related parts . PM me or E Mail @info@racecomponentsinc.com
Thanks
Frank R.C.I.
Thanks
Frank R.C.I.
Thread Starter
Newbie
Joined: Aug 2011
Posts: 57
Likes: 0
From: Riga
I am referring to power lever. Actually my thoughts are very simple - I want to keep ayc and want to keep lag as smaller as possible. ayc starts to brake at 500hp, so save too have about 400-430hp. low lag have small turbos, more power could be get from evo9 turbo. up to 420hp. about e85 - I want be able without a problem fill the car with standard petrol and drive to the track. i am in Europe and we have no proble with 98ths - so I guess we will tune car on that one.
injectors
Hello
I see you are looking for 400to 450 WHP the 1000cc inj will do the job for you . We can sell that injector to you at a good savings pver the ID and it is the same Bosch Injector . If you are interested please PM or E Mail me and i will be happy to give you a call
Thanks Frank R.C.I.
Oh I have a sale posted on the forum on injectors and Fuel pressure regulators .
Let me know .
I see you are looking for 400to 450 WHP the 1000cc inj will do the job for you . We can sell that injector to you at a good savings pver the ID and it is the same Bosch Injector . If you are interested please PM or E Mail me and i will be happy to give you a call
Thanks Frank R.C.I.
Oh I have a sale posted on the forum on injectors and Fuel pressure regulators .
Let me know .
I have evo4 with evo8 engine and evo8 turbo.
I am planning to improve it's performance with keeping lag as smaller as possible so I will be looking for installing evo9 turbo.
I am willing to get around 400hp.
Currently engine is being rebuilt - forged pistons and so on.
I hope get car till summer. However turbo upgrade is scheduled after summer.
So the questions is - does it make sense to change injectors/fuel rail/pressure regulator now or when I install the newer turbo and we try to get those 400hp?
I am advised to buy Injector dynamics 1000cc injectors. I counted that for 400hp it's ok to have 700cc injectors. If I buy 1000cc will this affect engine in any way? The point is that 1000cc Injector Dynamics is the popular model.
I am planning to improve it's performance with keeping lag as smaller as possible so I will be looking for installing evo9 turbo.
I am willing to get around 400hp.
Currently engine is being rebuilt - forged pistons and so on.
I hope get car till summer. However turbo upgrade is scheduled after summer.
So the questions is - does it make sense to change injectors/fuel rail/pressure regulator now or when I install the newer turbo and we try to get those 400hp?
I am advised to buy Injector dynamics 1000cc injectors. I counted that for 400hp it's ok to have 700cc injectors. If I buy 1000cc will this affect engine in any way? The point is that 1000cc Injector Dynamics is the popular model.
Hey man, I was on the same boat as you with regards to looking for injectors. All of the injectors being mentioned are bosch ev 14 core injectors. The guy above me, RCI is selling his 1000cc Bosch injectors for a very reasonable price. He also posted right above me. I'd suggest checking out his FS thread here:
https://www.evolutionm.net/forums/ve...ctor-sale.html
I decided to go with them. Do yourself a favor and at least get a price quote from him. I found his prices to be the lowest for what I got. I plan to do a full review after I've got them installed and the car retuned. I'll be going with the 71HTA at the same time.
Don't forget guys I have a Complete fuel sys from tank to Rail and from FPR to tank.
Check out my FPR and in Line Fuel Filters. I have some great deals on all related parts
Frank RCI
Check out my FPR and in Line Fuel Filters. I have some great deals on all related parts
Frank RCI
Hey man, I was on the same boat as you with regards to looking for injectors. All of the injectors being mentioned are bosch ev 14 core injectors. The guy above me, RCI is selling his 1000cc Bosch injectors for a very reasonable price. He also posted right above me. I'd suggest checking out his FS thread here:
https://www.evolutionm.net/forums/ve...ctor-sale.html
I decided to go with them. Do yourself a favor and at least get a price quote from him. I found his prices to be the lowest for what I got. I plan to do a full review after I've got them installed and the car retuned. I'll be going with the 71HTA at the same time.
https://www.evolutionm.net/forums/ve...ctor-sale.html
I decided to go with them. Do yourself a favor and at least get a price quote from him. I found his prices to be the lowest for what I got. I plan to do a full review after I've got them installed and the car retuned. I'll be going with the 71HTA at the same time.
I understand your being a sales guy and all but for about 80% of us complete fuel systems aren't needed being we drive our cars everyday not just all out track cars. Our fuel systems even with a double pumper are good to about 600 whp which for many of us is fine. There is no need to swap out lines, fuel rails, fprs or anything like that for a dd driven car under 600 whp.
Thread Starter
Newbie
Joined: Aug 2011
Posts: 57
Likes: 0
From: Riga
well, i am putting aeromotive fuel pump, will put aem fuel rail, id injectors and aem fuel pressure regulator. did i miss something?
Thread Starter
Newbie
Joined: Aug 2011
Posts: 57
Likes: 0
From: Riga
