I am getting into rebuilding transmissions as a business.

I was wondering what companies that sell Mitsu or =/>quality parts or even "rebuild kits"(assorted sizes of thrust plates and spacers, COMPLETE syncro assemblies but mostly individual syncro parts, seals, bearings etc.) I'm very busy and didn't have much luck with online searches but look a little more each day. A good amount of different sized spacers, snap rings and thrust plates is at top of list as well as syncro parts.

Any help is appreciated as well as from Vendors or Mitsu dealers. thank you EvoM!

 

Here ya go: http://www.jackstransmissions.com/pages/evo-selection. Top left corner. They sell rebuild kits for Evos 6-10. Hope this helps.

 

thanks, bump.

-sorry, but Jacks Transmissions isn't really what I'm looking for though it appears they run a good, honest and solid business with some must have know-how and attention to detail.

I need something more geared towards my business.(being able to order the individual syncro rings, cones, springs, spacers, snap rings, seals and washers in size and qty I have given until it is feasible for me to make bulk orders of the different sizes and assortments of parts to keep on hand)

Perhaps I haven't found the correct mitsu site, I may be wrong, but I recall reading somebody found individual syncro pieces(or was it the whole assembly including hub and sleeve? which I do not need) from an online mitsu site but I could not find it in my recent searches nor did I note it as I was exhausted when I got home . I've spent the past 30 mins searching online and not much luck for my needs.

ps:
I have 2 dealers I will speak with who (to my best knowledge)would probably help me most, but I still want to see all my options. I do value your inputs, even Jacks Transmissions is somebody and something helpful. keep em coming guys!

Send a PM if a reply is not appropriate, some of you may even say me posting this here isn't the best idea, but it's not a bad one either as I wouldn't want to rule out ANY options.

 

5th gear will grind right out of the box!

 

hahaha that's not the kind of input I'm looking for but thanks for bumping the thread

 

Jack does sell individual pieces. Look around their site. I've ordered on there before.

 

ive rebuilt my 5 speed and i mean total rebuild, everything but the shafts and gears was replaced due to a seal blowing and every moving part breaking.
Set up a account with mitsu, they should give u a good discount if your buying a lot,
I have one, and it cost me $1012 for every single moving part of the trans, OIL for the tcase and all the seals for th Tcase,Trans.
There are alot of parts to this trans.
and no 5th gear didnt not grind out of the box lol!

 

chu- thank you

blowngasket- yeah the 5th gear comment I love lol.

good job on your build, it does require knowledge, patience, and attention to detail to make sure it will shift properly and last as it's designed to. Has to be done right.

First I tried the Mistu nearest my house(location, worth a shot) but unfortunately it was not to my satisfaction, it actually appears they may be going out of business.

To complete my current projects I went with Don Herring Mitsubishi, Don runs a good business, is always personable, and I am pleased with their overall service. The parts department is friendly and helpful, and I especially enjoy the events he sponsors. I've done a little business with him since 07 or 08, and his staff has always been patient and professional, making it a simple and wise choice.

And yes, they do have a few parts to them