Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

Evolution Cranks but doesnt start

Thread Tools
 
Search this Thread
 
Old Apr 25, 2013 | 01:51 PM
  #1  
luislm21's Avatar
Thread Starter
Account Disabled
iTrader: (2)
 
Joined: Aug 2012
Posts: 69
Likes: 0
From: Usa
Evolution Cranks but doesnt start

I have an issue with my evo. I used it for a few days. One Morning i tried to start the car, the car was cranking but unable to start.

I checked Spark Plugs, and everything is OK with the ignition.

Camshaft Gears have the correct timing.

There is Fuel Pressure.

what is the problem>??
Reply
Old Apr 25, 2013 | 02:22 PM
  #2  
Ev0ikon's Avatar
Evolved Member
iTrader: (18)
 
Joined: Jan 2004
Posts: 3,677
Likes: 11
From: 3rd Rock {from = sun}
Cyl pressure check.
Reply
Old Apr 25, 2013 | 03:23 PM
  #3  
b16a95eg's Avatar
Evolved Member
iTrader: (12)
 
Joined: Aug 2008
Posts: 517
Likes: 0
From: Minnesota
Check the 10a fuse under the dash, it should be the very first one in the fuse box under that little storage cubby if I remember right. It should be labeled IGN on the diagram
Reply
Old Apr 25, 2013 | 03:26 PM
  #4  
luislm21's Avatar
Thread Starter
Account Disabled
iTrader: (2)
 
Joined: Aug 2012
Posts: 69
Likes: 0
From: Usa
all the fuses are Ok, how can i check Compression>>?? i rebuilt the engine recently
Reply
Old Apr 25, 2013 | 03:29 PM
  #5  
joseph143's Avatar
Evolved Member
iTrader: (8)
 
Joined: Sep 2006
Posts: 1,124
Likes: 4
From: El Paso, Tx
Double check the fuses... There are 2 under there... Also do you have pressure pressure or residual pressure in you fuel system... Check to make sure your knock sensor iac and crank position sensors are all working... All three will shut the car down
Reply
Old Apr 25, 2013 | 04:45 PM
  #6  
MyronGainz's Avatar
Evolving Member
iTrader: (6)
 
Joined: Jan 2012
Posts: 139
Likes: 0
From: USA
Originally Posted by joseph143
knock sensor iac and crank position sensors are all working... All three will shut the car down

This.
My money is on a dud sensor, or it not being plugged in at all.
Reply
Old Apr 26, 2013 | 07:25 PM
  #7  
luislm21's Avatar
Thread Starter
Account Disabled
iTrader: (2)
 
Joined: Aug 2012
Posts: 69
Likes: 0
From: Usa
howw can i check those sensors?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Roen
Evo X Engine / Turbo / Drivetrain
11
Oct 25, 2014 09:53 PM
Viikduhh
Evo General
6
Sep 30, 2014 05:31 PM
VKEVO
ECU Flash
1
May 21, 2014 09:55 AM
batty200
Evo Engine / Turbo / Drivetrain
9
Apr 22, 2014 05:11 AM
ozrallyzombie
Lancer Troubleshooting
4
Feb 19, 2014 05:46 AM




All times are GMT -7. The time now is 08:40 PM.