Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

Evo IX issues

Old Nov 1, 2013 | 10:25 PM
  #1  
Manuels83's Avatar
Thread Starter
Newbie
 
Joined: Feb 2010
Posts: 2
Likes: 0
From: Sydney, Australia
Evo IX issues

Hey guys, having some troubles with my 07 Evo IX over here in AUS. Car was running fine until it just cut out on me one day driving to work. Took a few attempts to get it started again but then ran fine for the rest of the day. Now it just keeps stalling on me. It has an aftermarket alarm\immobiliser, exhaust, intake, Walbro fuel pump, EVC and tune. I have taken a few videos to show what happens, what are your opinions? I'm thinking either faulty fuel pump\lines or the idle control valve.


Reply
Old Nov 2, 2013 | 09:16 AM
  #2  
domyz's Avatar
Evolved Member
iTrader: (6)
 
Joined: Jun 2010
Posts: 878
Likes: 7
From: Canada
First video seem like an immobiliser issue.

Second video confirm that the immobiliser works, at least this time.
Check fuel pressure and do you have a wideband? What is the AFR before that's happening.
Try opening the BISS screw a lot to see if it will continue to die like that.
Reply
Old Nov 2, 2013 | 03:11 PM
  #3  
barneyb's Avatar
Evolved Member
 
Joined: Jun 2006
Posts: 6,902
Likes: 151
From: Grand Island, NE
Aftermarket alarm?
Reply
Old Nov 2, 2013 | 03:35 PM
  #4  
SL0\/\/*B0Y's Avatar
Newbie
 
Joined: Sep 2007
Posts: 18
Likes: 0
From: Lawrence, Kansas
Rev it up while its trying to die. If it still dies then its not the iacv. Other than that, probably alarm related.
Reply
Old Nov 2, 2013 | 04:15 PM
  #5  
prowakeskater's Avatar
Evolved Member
iTrader: (14)
 
Joined: Jan 2011
Posts: 1,010
Likes: 2
From: Cincinnati
I had issues with my alarm too, different, but issues. Had to turn the key sometimes 50+ times to get the starter to work.

yank it and see what happens. thats spark cut.
Reply
Old Nov 18, 2013 | 06:38 PM
  #6  
Manuels83's Avatar
Thread Starter
Newbie
 
Joined: Feb 2010
Posts: 2
Likes: 0
From: Sydney, Australia
Problem solved. It was the fuel pump assembly harness. Not sure why it fried, my guess would be when I got the after maket fuel pump put in the harness wasn't treated so nicely and the wiring came loose and it was just a matter of time before it fried. To play it safe we replaced the assembly, fuel pump & harness.

Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
JT-KGY
Evo Engine / Turbo / Drivetrain
772
Jan 3, 2025 07:04 PM
stiffdogg06
Evo Engine / Turbo / Drivetrain
19
May 28, 2015 08:33 AM
marcusE
Drag Racing
11
Jul 2, 2013 07:37 PM
PHILLY EVO
AEM EMS
20
May 28, 2013 11:24 AM


Thread Tools
Search this Thread

All times are GMT -7. The time now is 01:50 PM.