Right so I won’t be running e85 as in the uk it’s hard to come by and expensive so I’m going to run 100 octane gas and a meth kit supplied by DevilsOwn and 100% meth as recommended by them which will give me around 108 octane from that!
I know high hp applications with e85 need big fueling equipment, I’ve already got a twin 450 br double pumper and Perrin fuel rail but which size injectors would you guys go with for that? 2000’s or could I get away with less? My car is going to be a high hp car so I want to make sure it’s going to be enough

 

Define high HP. Like, turbo size..?


2000's will make a touch over 1k on gas. Your meth is basically adding additional fuel to the equation also, so the size injectors you run for that will also change how big you need your primaries to be. Like a set of 1650 primaries can make about 750 on gas then add however much meth you're spraying.

 

Had plans for my car to be around the 900 mark, my turbo is a gt42r (76mm)

 

high quality 2000cc injectors such as ID2000 and FIC2150

will drive nicer than cheap low z pte1000 fic1000



stay away from low z fic 1450 crap injectors

If you are going to run oxyginated fuels run fic 1650 high z or ID1700 if not just go straight to 2000cc the 2000cc are cheaper btw

 

To be safe (and do things right), I recommend ID2000s. You may also want to go with a dual fuel rail setup.

I am a vendor for Injector Dynamics if you need a set!

 

Get a set of 2000's or 2150's and call it a day, if you want to turn it up in the future you will still have room to grow.

We trapped 182mph on a single set of 2150's on pump E85

-Austin@STM

 

^^^2150

 

ID2000 or FIC2150's.

 

I feel like people see the name ID2000 and assume its a 2000cc injector. The ID2000 actually flows 2225cc's....