After spending a whole day taking on this timing belt job. I got a good tension on the belt, not too tight nor too loose but this is what it sounded like. Normal?

 

Don't think that's your belt making the noise. Did you replace the pulleys too? If not you should.

I just replaced everything and there's no noise.

 

Definitely not normal. Sounds like a bad tensioner or idler pulley.

 

just had all belts and pulleys done with gates belts here. I have no abnormal noises

 

Your not the first, there's other threads here reporting the same problem with people replying either that they don't have the problem or writing they solved it by switching back to OEM. I have no experience with the Gates belt.

 

sounds to tight.
maybe a tension problem

 

Sounds like its too tight, or the bearings are bad.