Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

lean idle after clutch install

Thread Tools
 
Search this Thread
 
Old Oct 15, 2018 | 11:56 AM
  #1  
twinkie_mayne's Avatar
Thread Starter
Newbie
 
Joined: Sep 2018
Posts: 19
Likes: 3
From: WI
lean idle after clutch install

hi guys, i just finished installing my clutch over the weekend and after install i started the car and it has been idling lean 16-17 when warm.
sometimes when im driving and giving light boost the wideband also isnt displaying anything. charge piping seems to all be tight along with exhaust. o2 sensor was never loosened or removed from the downpipe but was unclipped and reclipped.

kinda stumped. anyone have any input?
Reply
Old Oct 15, 2018 | 12:11 PM
  #2  
LetsGetThisDone's Avatar
EvoM Guru
10 Year Member
Liked
Loved
Community Favorite
iTrader: (1)
 
Joined: Oct 2013
Posts: 15,973
Likes: 1,629
From: Las Vegas
Is the car tuned? On SD or MAF? If on MAF, it's possible you fixed a leak the car was tuned with. Also, if it's on MAF with the stock intake and/or boost controller, make sure the line from the BCS that is supposed to connect to the intake pipe is connected.
Reply
Old Oct 15, 2018 | 12:58 PM
  #3  
twinkie_mayne's Avatar
Thread Starter
Newbie
 
Joined: Sep 2018
Posts: 19
Likes: 3
From: WI
it was previously tuned yes. currently has a jm fab intake with maf as well as a mbc.
Reply
Old Oct 15, 2018 | 01:32 PM
  #4  
twinkie_mayne's Avatar
Thread Starter
Newbie
 
Joined: Sep 2018
Posts: 19
Likes: 3
From: WI
Does this from time to time too.
Attached Files
Reply




All times are GMT -7. The time now is 06:45 PM.