Sputter/Misfire WOT
Thread Starter
Newbie
Joined: Feb 2023
Posts: 22
Likes: 3
From: Fairbanks, AK
The boost controller should have only 2 lines hooked up to. #3 is boost fomr the compressor cover, #2 is out to the bottom port on the wastegates. #1 is the vent, and should be left to vent to atmosphere. With #1 seeing intake manifold reference, this is likely your issue.
Thread Starter
Newbie
Joined: Feb 2023
Posts: 22
Likes: 3
From: Fairbanks, AK
The boost controller should have only 2 lines hooked up to. #3 is boost fomr the compressor cover, #2 is out to the bottom port on the wastegates. #1 is the vent, and should be left to vent to atmosphere. With #1 seeing intake manifold reference, this is likely your issue.
Still have the stutter which has a different tone now but I also hit either fuel or boost cut because I'm slamming into a brick wall immediately after the stutter.
Thread
Thread Starter
Forum
Replies
Last Post
turbocheese
Evo General
12
Aug 14, 2017 03:47 AM
FL_SilverEvo8
Evo Engine / Turbo / Drivetrain
22
Jun 3, 2010 07:03 AM