I really need some expert advice on what really works as giving me some bigger HP/TQ numbers. I want to do one more mod and a reflash within the next 2 weeks and I have no clue what the mod should be. I am looking to spend no more than $500.00 on the mod. I currently have:

Buschur upper IC
HKS 272/272
Buschur turbo back with cat delete
maual boost controller
buschur intake
alky injection
255 fuel pump
Custom Dynoflash


I am running 23 psi at the track should I get biiger injectors next maybe??

I appreciate any input on this. Thanks!!!

 

10.5 hotside $500.00 should include parts and install. Good results in the mid range and top end. 10-20whp ( need a tune too )

 

+1

 

so 10.5 hotside what about injectors you think I need them?

 

Only if you're upgrading the turbo.

 

Lower IC pipe $200 and 10.5 housing $295

 

buschur deluxe FMIC and spike the boost as high as you feel safe doing so, tapering down at redline...

if you're sticking with stock turbo, there is absolutely no need for bigger injectors... you won't make any extra power... ESPECIALLY with your DynoFlash and alky injection.

 

Thanks for the info. everyone I am thinking my best bet is the 10.5 hotside and Lower IC piping or ported o2 housing? Then send the car out for another custom reflash.

 

The ported O2, or a 3" O2 housing like Helix makes will be a good combo for the 10.5 as it helps to offset the 200rpm or so slower spool. With the 10.5 and O2 housing turbo, spool will be stock.

 

didnt read his mods

 

well, it's safer to run bigger injectors since you are runnning at least 90% duty of your stockers.

 

Yeah, lower IC pipe will give you more than the upper did...

 

some cool stickers

 

nawz and neons.

 

when looking for a 10.5 hotside... what exactly is the part called? I have been wanting to get this but don't know what too look for exactly...