Driling Holes Into Steering Wheel
Thread Starter
Account Disabled
Joined: Oct 2005
Posts: 83
Likes: 0
Driling Holes Into Steering Wheel
I'm thinking about drilling 2 small holes into the streeting wheel (the metal part left and right side) I noticed the back peice seems to be kind of hollow. would it be hard to wire 2 buttons? Would this affect the airbag at all?
To get an idea of what im trying to accomplish.
2 red buttons NOS 1 and NOS 2
no flaming, im serious. is this safe to do without affecting airbag?
To get an idea of what im trying to accomplish.
2 red buttons NOS 1 and NOS 2
no flaming, im serious. is this safe to do without affecting airbag?
Originally Posted by FastestEvar
I'm thinking about drilling 2 small holes into the streeting wheel (the metal part left and right side) I noticed the back peice seems to be kind of hollow. would it be hard to wire 2 buttons? Would this affect the airbag at all?
To get an idea of what im trying to accomplish.
2 red buttons NOS 1 and NOS 2
no flaming, im serious. is this safe to do without affecting airbag?
To get an idea of what im trying to accomplish.
2 red buttons NOS 1 and NOS 2
no flaming, im serious. is this safe to do without affecting airbag?
Newbie
Joined: Jul 2005
Posts: 69
Likes: 0
From: Nashville, TN
They did it with the stock wheel on 2 fast 2 furious for the "nos". just watch the movie and get an idea of how you'd like it. I specifically remember it with the tag team drag race scene. God that movie made our car look bad.... still get people making references to it.
Evolved Member
Joined: Sep 2005
Posts: 1,206
Likes: 0
From: Frederick, Maryland
Originally Posted by undrcroft
They did it with the stock wheel on 2 fast 2 furious for the "nos". just watch the movie and get an idea of how you'd like it. I specifically remember it with the tag team drag race scene. God that movie made our car look bad.... still get people making references to it.
Trending Topics
i would never drill into my steering wheel, just my opinion here...if you're wondering if it would look ok, just photochop it or have someone do it for you before you put holes in the MOMO
Evolving Member
Joined: Apr 2005
Posts: 274
Likes: 0
From: Joliet, Illinois
Originally Posted by Vroompsh
i would never drill into my steering wheel, just my opinion here...if you're wondering if it would look ok, just photochop it or have someone do it for you before you put holes in the MOMO
Newbie
Joined: Sep 2005
Posts: 9
Likes: 0
From: NH
Also keep in mind structual integrity of the steering wheel. Is a small hole less than an 1/8", just to have clearance of a machine screw or something? I thinking bigger than say 3'8" might start to weaken the steering wheel. I had a aftermarket steering wheel bend all the way to the steering column when I rear ended somebody years ago...my fingers were actual pinched inbetween the wheel and the columb.
But if you feel ok about it knock your self out.........mark hole. ***** punch, center drill, drill, debur....that simple right?
Good luck
Craig
But if you feel ok about it knock your self out.........mark hole. ***** punch, center drill, drill, debur....that simple right?
Good luck
Craig
Originally Posted by celerilux
Great point. Someone photochop for this kid before he gets airbagged in the face.
