I was given a tt by my dealer so I thought It was nice to have. they also installed my alarm. The problem is I cant set my alarm and Leave the car running. The car automatically unlocks when the tt shuts down the car. So im babysitting again, I know the timer is not that necessary, But, It annoying. Is this a easily fixed problem?

 

aftermarket alarm? if so, you should have them set to arm while running, fairly easy to do if you have programming guide, factory alarm?? I don't know.

 

aftermarket

 

They'll have to wire the TT in as an accessory or run it with a relay. It took three of the best guys at the shop I was at to figure out how to make mine work (Viper 5000). Good luck!

Tom

 

i am having a hard time with my compustar as of late also. Its supposed to have a TT built into it. U take the key out of the ignition, and when u close the door the motor shuts off. So i kinda have to sit there for a minute to let my car cool off too. That was when it was working. Now nothing seems to want to work.

 

Press buttons III and IV on the remote at the same time for 1/2 second to turn the TT back on.

 

almost any DEI( viper) alarm has the ability to arm while ign on. the default setting is Off. would save a lot of time in wiring relays.