Time attack @ midohio
im actually going to be running the OEM evolution tire (yoko advan a046) on stock gold bbs's for the event. I got them as used takeoffs for $340 for all 4 (about 4k street only miles) anyway I gotta save some money and go with those, but oh well they should do good! I am going to run race pads though, then besides the maxed out factory alignment (max neg camber up front) and the FSB im pretty much stock.
Thread Starter
Evolved Member
iTrader: (11)
Joined: Jan 2006
Posts: 602
Likes: 0
From: mansfield ohio
Wow i didnt expect to see this many of you where going to show up. Now im really excited about this even haha and i wont even be participating lol. Does anyone know if there will be any major shop cars attending this event?
I'll be on the stock Evo advans as well. I also have a rear sway, maxed stock negative camber up front, PF front pads, and some WORKS power mods. Unfortunately, I will be there on Saturday afternoon to watch and running only on Sunday due to work commitments. I really don't know if I will be at all competitive
, but I know I'll be faster on the track at the end of the day than I was at the beginning! See you all there
Johannes
, but I know I'll be faster on the track at the end of the day than I was at the beginning! See you all there
Johannes
Originally Posted by johannes
It will also be my first track event in the Evo, and my first trip to Mid-Ohio.
Those are the pucker spots for me. I haven't even gotten close to taking T1 too fast, the sight of brake markers and a bridge just makes me take off too much speed, there's a lot of track and if you stay on the gas you'll come through. I still have too much push to make T14 (Carousel) a risk but cars do go off there.
Dave
Originally Posted by BigBADGSX
Wow i didnt expect to see this many of you where going to show up. Now im really excited about this even haha and i wont even be participating lol. Does anyone know if there will be any major shop cars attending this event?
I saw a entrance for the Perfomance Autowerks EVO, That is the red one with the Airjack system in it and the nice cage. (below)

Originally Posted by johannes
I'll be on the stock Evo advans as well. I also have a rear sway, maxed stock negative camber up front, PF front pads, and some WORKS power mods. Unfortunately, I will be there on Saturday afternoon to watch and running only on Sunday due to work commitments. I really don't know if I will be at all competitive
, but I know I'll be faster on the track at the end of the day than I was at the beginning! See you all there
Johannes
, but I know I'll be faster on the track at the end of the day than I was at the beginning! See you all there
Johannes
cool, what PF pads did you get? I just got a set of PFC 01 compound pads F&R off a T2 race STi guy for pretty cheap (still new in box)
Thanks for the tips. My track experience consists of 2 HPDE's at Grattan in a Mazda RX-8, 2 at Gingerman in A VW R32, and 2 more at Grattan in the R32. I'm inexperienced but very eager to learn! I realize I'm probably going to get my a** kicked, but the fun will be improving my driving, and seeing how the "big boys" do it-both mod-wise and driver skills.
Johannes
Johannes
I just got the front only PF 95.7 pads from RRE. I haven't really had the chance to see what they can do yet, but the sure do squeel like a stuck pig under light pedal pressure.
Johannes
Johannes
Man, now I am really pissed I can't make it. I've got some laps under my belt at Mid-Ohio, but that is like the worst weekend possible for me.
The irony of the situation is I am going out of town to get my Eclipse out of storage so that I can get it ready for tracking in April. DOH!
Guess I'll just have to wait an extra month.
The irony of the situation is I am going out of town to get my Eclipse out of storage so that I can get it ready for tracking in April. DOH!
Guess I'll just have to wait an extra month.
Last edited by Talon; Mar 15, 2006 at 06:34 AM.
Andrew, did you get my PM on the STi forum? I am "Twinturbo" over there.
PS - I would like to know how well the Evo OEM Yokos do; that's what I will be running on my car later this summer. I've still got my Dunlop Winter M3s on the car because I don't trust those Yokos when it's cold out... had a 'bad' experience with that once while a passenger in someone else's Evo.
I will probably put them back on mid-April or so, depending. They've only got like 1000 miles on them as of now.
PS - I would like to know how well the Evo OEM Yokos do; that's what I will be running on my car later this summer. I've still got my Dunlop Winter M3s on the car because I don't trust those Yokos when it's cold out... had a 'bad' experience with that once while a passenger in someone else's Evo.
I will probably put them back on mid-April or so, depending. They've only got like 1000 miles on them as of now.
Last edited by Talon; Mar 15, 2006 at 06:37 AM.
Evolving Member
iTrader: (3)
Joined: Jul 2005
Posts: 457
Likes: 0
From: In Hell, but making my way out
Originally Posted by Dropspeed
Yes/Maybe Those are 255/40/17s............I might switch to 275/40/17s I have to locate a friends fender roller before the event to assist with the fitment.
What tire is every one running on in the street class??????????
Winston, Those are definatly homemade about 30 minutes before the pictures. I actually used them to roll the car back onto (off the scales) so the scales can be reset if/as needed.
Matt
What tire is every one running on in the street class??????????
Winston, Those are definatly homemade about 30 minutes before the pictures. I actually used them to roll the car back onto (off the scales) so the scales can be reset if/as needed.
Matt
Originally Posted by Dropspeed
Buschur is supposed to have a car there that is at the paint shop now. AMS is also bringing a car. Might be fairly stock.
I saw a entrance for the Perfomance Autowerks EVO, That is the red one with the Airjack system in it and the nice cage. (below)


I saw a entrance for the Perfomance Autowerks EVO, That is the red one with the Airjack system in it and the nice cage. (below)




