I hate these types of threads usually, but a friend of mine asked me how many HP I have with my mods and I didn't know exactly what to tell him. Here's my list:
2003 Evo 8
Buschur TBE w/ hi-flow cat
AEM intake
Walbro 255
Helix IC pipes
MBC at 20 psi
Dynoflash Mail-in tune

A few quick estimates of what I have to the wheels is all I'm looking for. Thanks guys.

 

maybe 270-290whp

 

I would say 270ish

 

probably looking at 500hp. This reading would be coming from the *** dyno.

WARNING! some *** dynos are more accurate than others

 

if you put some neons on then you would be at like nine hundo, esse

 

Im sure you can squeeze some more out if you set your mbc to 21 psi, unless you don't have access to 93 octane.

 

Why not just go to the dyno and find out?

 

^^^ +1

 

Thanks for the quick replies. I had my MBC at 21 before, but lowered it for daily driving. I'm back up to 20, but that could certainly be raised since I usually run Sunoco 94 octane.


I'd like to get to the 300 mark. What is something relatively inexpensive I can bolt on to the gain that extra 20-ish HP: 10.5 Hotside, O2 housing, what? I'm looking for the cheapest option, so cams are out for now.

 

Good suggestion, Warr. I'm looking to set something up for this summer with a few friends in the area. Until then, I was just looking for an estimate.

 

285WHP/276TQ thats what i have with the same mods you listed, (diff. companies tho) i also have injectors.

 

Man, these threads got to stop there are like a million of them. Wasting bandwidth. Just search or dyno the dam car.

 

^^^Agreed.

 

this topic is getting old guess my hp it was cool for the first few threads but its played out now lets move on people

 

go catless