HELP! I need a new o2 sensor Dealer wants $407
interesting you guys are having so much trouble getting these off.
i'd recommend using pb blaster. i sprayed a little on before taking mine out. 50k miles and it came out without a hitch. i'd put some antisieze on the threads before placing it back in there!
i'd recommend using pb blaster. i sprayed a little on before taking mine out. 50k miles and it came out without a hitch. i'd put some antisieze on the threads before placing it back in there!
Evolving Member
Joined: Jan 2005
Posts: 110
Likes: 0
From: Pinole, CA
Originally Posted by snake679
I guess Mits is not making enough money to use anti-sieze....Mine was frozen after 1500 miles.......
Great info in this thread guys!
Originally Posted by EiEVO
i have both of the o2 sensors for my 8. They were given to me by "Walker Products" the manufacture of oxygen sensor when i did a article on their sensors and a install on a s-10 truck. So they gave me both sensors for my car for doing it. Both are brand new.
www.walkerproducts.com if you have any questions feel free to call them and get the part number for your application.
The two part numbers i have are:
#250-24653"secondary"
#250-24631 "before cat/on o2 housing"
$125.00 shipped each!
www.walkerproducts.com if you have any questions feel free to call them and get the part number for your application.
The two part numbers i have are:
#250-24653"secondary"
#250-24631 "before cat/on o2 housing"
$125.00 shipped each!
Thread
Thread Starter
Forum
Replies
Last Post
Jcusco407
09+ Ralliart Engine/Turbo/Drivetrain
14
Jul 28, 2010 05:56 AM
