Please Answer Quick on IX bumper

Reply Subscribe

Thread Tools

Search this Thread

Jan 23, 2007 | 09:37 AM

Mitsu3

Thread Starter

Evolving Member

Joined: Mar 2006

Posts: 109

Likes: 0

From: Long Island, NY

Please Answer Quick on IX bumper

i took off all the bolts and scrwes and it doesnt want to come off. IT seems it is stuck on the crash beam like i didnt take off the bolts?

Jan 23, 2007 | 02:03 PM

Rice King

Evolving Member

iTrader: (3)

Joined: Sep 2006

Posts: 359

Likes: 0

From: Yuba city, norcal

... you got 4 bolts off the back inside, the two wheel well bolts..,
did you remove two screws where the tires are?

Jan 23, 2007 | 11:57 PM

Talonmotosports

Newbie

iTrader: (3)

Joined: Jan 2006

Posts: 74

Likes: 0

From: Florida

Check the Evo 'How to.." page. You may find usefull info with pictures there

Jan 24, 2007 | 01:30 AM

TeKiZeRo

Evolved Member

iTrader: (25)

Joined: Jan 2004

Posts: 595

Likes: 0

From: San Diego

There's also two bolts on the sides of the intercooler covered by those little round caps that you can pop off with a screwdriver or your finger.

Jan 24, 2007 | 01:32 AM

davidpath

Newbie

Joined: May 2006

Posts: 69

Likes: 0

From: Milwaukee

did u take the bolts of from the license plates an the passenger side its a 10mm bolt

Jan 24, 2007 | 01:52 AM

fusionchicken

Evolved Member

iTrader: (1)

Joined: Jul 2005

Posts: 1,661

Likes: 0

From: socal

Quote:

Originally Posted by TeKiZeRo

There's also two bolts on the sides of the intercooler covered by those little round caps that you can pop off with a screwdriver or your finger.

this is the one people usually forget to take off...happened to me too and i couldn't pry the bumper off.

Jan 24, 2007 | 01:54 AM

bboypuertoroc

Evolved Member

iTrader: (17)

Joined: May 2005

Posts: 2,046

Likes: 76

From: Riverview, FL

There should be 6 bolts (one in each wheel well, one behind the little round pop-outs, two above the radiator) and then the 2 plastic clpis above the radiator and the four clips in the wheel wells (2 on each side). Then just pull the bumper real quick like from each side (careful not to scrape the ground).