i have an AMS gt35r kit installed next week,rigth now i have installed Electromotive Engine Management , 860cc inj , single 255 walbro with meth from snow, stock evo8turbo, 272hks, forged internals with 375hp and 11.9 1/4mile. i will push to 550hp with the gt35r kit,anybody have use the 325lph walbro? my friend speedshop have them in stock but i dont see no body mention it in this forum. thinking to upgrade injectors to 1000cc too. what you guys think,i beleive dual walbros are overkill for 550hp and will need a complete fuel system at least -8 lines. by the way, dual walbros are two pumps intank or one intank and inline in series?any photos?

 

If you're going to also get a tune for c-16 and plan on going over 580whp dual will be necessary. Some evos make up to 600 without the pump maxing out but thats just hear say. If you don't want to go above 550 you should be ok with a single.

 

dual intank or intank255/inline255 conected in series? anybody hear about the 325lph walbro?

 

325lph walbro would be awesome...

 

There is no 325LPH Walbro, AFAIK. The biggest is 255LPH, and the only difference is the High Pressure versus the standard. The model numbers are 342, etc. but the actual flow is 255LPH.

 

ditto on the 325....biggest i kno is BR's HO 255...
if there is a 325...would love to kno where and how much...

 

it's prolly an external right?

 

There is NO 325LPH Walbro, internal or external. If you can find one, post up the link and part number.

 

heheh i meant if there was one... i don't believe there is one either.