I found a vacuum block that lets you run multiple vacuum lines off it. The problem is i dont remember where i saw it. Does anyone have any idea ?

 

Maybe this one will work for you...bottom of the page $22.99



Here is the link http://www.jgstools.com/turbo/ka24et.html it's almost at the bottom of the page.

 

i looked but i didnt find anything that resembled it in any way but thank you

 

http://cgi.ebay.com/ebaymotors/BLOX-...QQcmdZViewItem

i found it when i was lookin for stuff to build an itb setup for my civic. and i live in r.i to holla if you ever need oem parts

 

http://www.mcmaster.com


part # 5469K151


i recommend the single sided 6061Al for around 15$ you'll also need to pick up some 1/8" NPT to Hose fittings & a 1/4" NPT to hose fitting for the inlet

 

the blox one should be fine right its a universal part.

 

If you want to be fancy, you can buy one of these:



They come in numerous colors.

 

yah i was just looking at that saw it on ebay too lol.

 

Fixed the link, now it shows a pic of what you're looking for.

 

Thanks guys not sure what one im going for 6 or 4 gotta see how many lines they are i want to get tighten up under the hood. Doing it now so well see.

 

i have the golden eagle one on my integra
heres a pic. its mounted on the firewall

 

Vibrant has an awesome vaccuum block, Its the one I used on my talon

Good luck!
http://vibrantperformance.com/catalo...96753a282118d3

 

I have that one in my car, and I must say, it's a very very nice piece. The only thing I did different was get rid of the end hose fittings it came with and put AN fittings on it, and used it as a through block.

Very very nice piece.

 

heres one from tuner toys
http://tunertoys.zoovy.com/c=sNisbS3...s_Edition.html

 

go with the golden eagle.. They are nice